technical people help please
#3
Senior Member
Thread Starter
Join Date: Jun 2002
Location: montgomery alabama
Posts: 1,751
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PHiZ
Stroke, I believe journals are the same.
Stroke is going to interplay with rod length and deck height to determine if the setup will be successful.
-PHiZ
Stroke is going to interplay with rod length and deck height to determine if the setup will be successful.
-PHiZ
#4
Rotorphile.
Join Date: Mar 2002
Location: Richmond, VA
Posts: 10,120
Likes: 0
Received 0 Likes
on
0 Posts
The B16A* has a 77.4mm stroke, so that's a 38.7mm main center to journal center crank.
The B18C1 and C5 have identical 87.2mm strokes, so that's a 43.6mm C-to-C crank.
Each journal of a B18C* crank is 4.9mm taller the the corresponding section on a B16A* crank.
The B18C1 and C5 have identical 87.2mm strokes, so that's a 43.6mm C-to-C crank.
Each journal of a B18C* crank is 4.9mm taller the the corresponding section on a B16A* crank.
Thread
Thread Starter
Forum
Replies
Last Post
MrFatbooty
The Basement
127
01-17-2004 09:26 PM
Shore 96 Teg
The Basement
8
12-12-2003 03:04 AM