I have a jg edelbrock inake manifold on my gsr. I also have a venom fuel rail. The fuel pressure regulator put the fuel return line too close to the manifold and kinked the return line. I heard of a bracket that you could put on there and it would reposition the regulator. Unfortunately I couldn't find one. Anyway, I have a b18a that I just use for parts and noticed the fuel pressure regulator on it. it has a 90 degree fitting on the bottom. I swapped it for the old one and it fits perfectly. I'll post a pic tomorrow but I just wanted to share just incase anyone else had this problem.

btw, if you ever get a chance to buy blown up motors for cheap, do it. They are worth a couple hundred dollars just for parts.

 

On my TWMs I took a piece of hard line (brake line I believe), fit it to the outlet, and then bent it into the shape I needed.