Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

need help and info please

Thread Tools
 
Old Jan 22, 2004 | 01:48 PM
  #1  
bustah49's Avatar
bustah49
Thread Starter
Mr. Motorhead
 
Joined: May 2003
Posts: 1,031
Likes: 0
From: middle of no-where
Default need help and info please

i have a 97 civic dx hb.... i just bought a front clip from a 2000 si. how hard is it to change the entire dash over to my 97? i don't want to chop up the si wiring. i want it to look factory stock. is it a unbolt and unplug swap? also...when i swap the motors...do i need the fuel pump from the si? also...anything else that i need please let me know..
Reply
Old Jan 25, 2004 | 12:55 PM
  #2  
Bumnah's Avatar
Bumnah
So OG it hurts.
 
Joined: Mar 1999
Posts: 6,592
Likes: 0
From: VA
Default

i don't blieve the dash is plug and play, but if it does turn out it is, i would suspect you'll have to use all the wires from the si clip.

i beilieve the 96-98 civics had mechanical climate controls, while the 99's on received all electrical.

unless you got the fuel tank with the clip, you probably do not have the fuel pump.
you need the fuel pump.

newer fuel filter wouldn't hurt.
__________________
Project EVA - The Track Package
-----
Project EVA
-----
Reply
Old Jan 25, 2004 | 02:49 PM
  #3  
bustah49's Avatar
bustah49
Thread Starter
Mr. Motorhead
 
Joined: May 2003
Posts: 1,031
Likes: 0
From: middle of no-where
Default

i got the whole car
Reply




All times are GMT -8. The time now is 04:23 AM.