Crank ???
Thread Starter
The Comic Guy
Joined: Jul 2003
Posts: 967
Likes: 0
From: Davis, CA
Crank ???
The threads on the crank to bolt the crank pulley up are stripped on my 95 GSR, so I'm thinking I need a new crank to go with my rebuild. Do I need a crank from this same engine or is any B18 okay?
Rotorphile.
Joined: Mar 2002
Posts: 10,120
Likes: 0
From: Richmond, VA
The only stock-for-stock swap is the B18C crank. It is unique to the B18C.
If you wanted a few more CC's, a B18A/B or B20B/Z crank and rods can be substituted, but in that case I would recommend aftermarket rods. All B18* and B20B/Z blocks have the same deck height, making this possible.
If you wanted a few more CC's, a B18A/B or B20B/Z crank and rods can be substituted, but in that case I would recommend aftermarket rods. All B18* and B20B/Z blocks have the same deck height, making this possible.