Notices
Drag Strip From the staging lanes to the finish line, this is the spot for on-track drag racing discussion.

92 hatch si

Thread Tools
 
Old Jul 8, 2006 | 05:21 PM
  #1  
importracer06's Avatar
importracer06
Thread Starter
Junior Member
 
Joined: Jul 2006
Posts: 3
Likes: 0
Default 92 hatch si

hey i just bought a 92 hatch si with the falling mods. and i was wondering if you guys know what it would run in the 1/4.

94 Integra B18b Motor
96-98 Integra GSR Transmission
NGK Spark Plugs and Spark Plugs Wires
AEM Cold Air Intake
Generic Header 4-2-1
not sure what the Exhaust is but its aftermarket
F1 Stage 3 Clutch
Reply
Old Jul 8, 2006 | 11:01 PM
  #2  
RicoD's Avatar
RicoD
Pull my finger
 
Joined: Apr 2004
Posts: 41,423
Likes: 0
From: Arizona
Default

go run it and find out? :dunno: seems like the best way to go... rather than have dozens of different answers because it all depends on dozens of factors
Reply
Old Jul 8, 2006 | 11:54 PM
  #3  
importracer06's Avatar
importracer06
Thread Starter
Junior Member
 
Joined: Jul 2006
Posts: 3
Likes: 0
Default

yeah i was just wondering because soon i can run it is in sept. so i was just try to get ballpark of what it will do in the 1/4.
thanks
Reply
Old Jul 9, 2006 | 04:09 PM
  #4  
hitman619's Avatar
hitman619
SDSU Basketball
 
Joined: Jul 2005
Posts: 9,483
Likes: 0
From: Diego
Default

high 15s low 16s
if your a good driver
Reply
Old Jul 10, 2006 | 04:34 PM
  #5  
paraplegic's Avatar
paraplegic
Junior Member
 
Joined: Jul 2006
Posts: 49
Likes: 0
Default

i had a 4dr LX model and ran a 15.9 in the 1/4 mile
Reply
Old Jul 20, 2006 | 03:32 AM
  #6  
gingas's Avatar
gingas
Senior Member
 
Joined: Dec 2004
Posts: 1,403
Likes: 0
From: White Plains, MD
Default

I'd say you should be able to run a low 15 even though si's are a tad bit heavier. It depends on your launch, track etc.. Since you have a Ls motor w/ a Gsr tranny what are your rpm's at 80 mph in 5th gear. Just trying to see how the Gsr tranny help w/ a Ls motor.
Reply




All times are GMT -8. The time now is 06:16 AM.