help;need traction at drag strip?
#13
Senior Member
Join Date: Jun 2002
Location: montgomery alabama
Posts: 1,751
Likes: 0
Received 0 Likes
on
0 Posts
get rid of the big brake kit, buy some bogarts, or some type of WIDE 13" rim and put some wide radials on it, that have big side walls, so that you can get some crinkle out of those walls.
#14
Git-R-Done
Join Date: May 2004
Location: East Haven, Ct
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
nah i bet this kid can drive, he jus needs drag radials and traction bars. U can also look into ur tranny and go with a phantom grip or a spool. The only thing about a spool is that its only made for 1/4 mile racing. If ur jus spinning off the line then u need to look at doing transmission work. I'd stick wit b16ahybrid and see how it turns out. blkstangman88 why r u in this thread. I think most of us will stick to our hondas and jus embarass u mustang guys...
BTW: The thing about the DOT drag radials, u wanna check to see what kind of compound ull need. something sticky? it all depends on the cars weight and shyt like that..hope this info helps
BTW: The thing about the DOT drag radials, u wanna check to see what kind of compound ull need. something sticky? it all depends on the cars weight and shyt like that..hope this info helps
#15
I missed Sean
Join Date: Aug 2004
Location: Fairfield/Bridgeport CT
Posts: 11,285
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by mikemerc85
nah i bet this kid can drive, he jus needs drag radials and traction bars. U can also look into ur tranny and go with a phantom grip or a spool. The only thing about a spool is that its only made for 1/4 mile racing. If ur jus spinning off the line then u need to look at doing transmission work. I'd stick wit b16ahybrid and see how it turns out. blkstangman88 why r u in this thread. I think most of us will stick to our hondas and jus embarass u mustang guys...
BTW: The thing about the DOT drag radials, u wanna check to see what kind of compound ull need. something sticky? it all depends on the cars weight and shyt like that..hope this info helps
BTW: The thing about the DOT drag radials, u wanna check to see what kind of compound ull need. something sticky? it all depends on the cars weight and shyt like that..hope this info helps
get an LSD if you are even thinking about it
#16
h: I have a 95 hatch with b16a no mods not even a header ran 14.2et 1/4 mile with nitto 555
14 inch rim I also used tire softner. I launched at 4000 rpms. when lauched at higher rpms snaps axel
14 inch rim I also used tire softner. I launched at 4000 rpms. when lauched at higher rpms snaps axel
#17
NAM #0001
Join Date: Jun 2002
Location: Cornelius, NC
Posts: 4,050
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CivicSiRacer
Learn how to drive.
My current car has just as much whp and probably 100 more wtq than you and I have no problem with launching it :dunno: