your car was off and warmed up when you did it? or did u let it go on a cold engine, and also... idd you let it sit 5 mins or just hook it back up and go/

 

my car was on when i did it and the engine was COLD... after i pure 1/3 of the bottle in to the TB i turned off the engine. Let it set fo 5-6 mins then took a spin around the block then into the street WOT.

 

I did my friends 94 accord and when I place the straw into the TB plate it rev the engine to high so what we did was inject the sea foam then start the engine (so the liquid would be sucked into the TB) did that 8 times, then let it sit for 5-6mins. Took a spin on the freeway WOT. could be done both ways

*** just dont pour it liquid all at once into the TB or you'll hydo lock your engine ***
take your time

 

I agree on the bottle from autozone...

 

i did this with the STP spray... and my car now has an idle surging problem... dont ask me what caused it... everything is installed correctly.

 

YOU DID IT WRONG, YOUR CAR IS GONNA DIE!

 

You F'd up your MAP Sensor. h:
Some Carb/TB cleaner will mess it up. Is your CEL (check engine light) on?

 

BUMP! can someone update the pictures? they don't seem to be "available at this time" what's it doing, taking a shit?

 

Yea , it's sapose to go in the brake booster line.

 

I just cleaned my TB again this weekend and updated with new pictures.