yep, and the factory accord 1/2 shaft

 

does anyone know where i can find detailed info on the 6th gen accord h22a swap? i have a coupe of questions reguarding the injectors, map sensor, and distributor wiring. as well as the perfect ecu to run with my '93 obd1 jdm h22a motor. i have a 00 accord coupe lx 4cyl 5spd 2.3l vtec. any and all help is greatly appreciated!

 

try h22a.org dont know if that site is still up or not, havent been there in a while. i dont know much about the 6th gen swap. never done/seen one

 

Got a question, I dont have an Accord but do have the 95 H22a. My power steering is not hooked up. I'm not sure of all the components that I'll need but do i use all the prelude components or do i have to mix and match with civic components? TIA!!

 

so i can use my stock axles and stock motor mounts?

 

its a civic, you dont need ps... but if you must, then you have to use a prelude pump and im not sure of the line you need. we usually throw ps out.

 

yep, sure can

 

for the motor mount placer racer makes it. call emm. they have the mount for like 162 plus shipping.

 

anyone know how to wire a accord obdII dizzy wire connecter to a obdI prelude connecter. I've brought the CPS up to the dizzy and have a few diagrams but anyone have an idea which wires go were??

if you can email me at nsxyello@yahoo.com with the info. Its the last thing I have to do to get my buddys shit up and going

 

look in ebay i have one there