Power Booster Blues
Thread Starter
Junior Member
Joined: May 2009
Posts: 4
Likes: 0
From: Tampa Florida
Power Booster Blues
Hello,
I'm having a very difficult time doing what should normally be an easy job. I have a "92"Accord EX (5-speed trans-axle). My Master brake cylinder was bad & leaking through the back seal. I want to replace the power booster and I'm having one hell of a time getting this thing out!! It either hits on the intake or the strut well. Every thing I reference regarding this proceedure gives no indication or warning of such a problem. I know i have followed all the removal instuctions in my repair manual but I still can't seem to contort this thing out of the car. If there is some trick of the trade that anyone could share, I would be very grateful. I have been working on my Honfa for sometime now and realize things are very tight but this is incredible !!
Thanks in Advance
PEACE <><
I'm having a very difficult time doing what should normally be an easy job. I have a "92"Accord EX (5-speed trans-axle). My Master brake cylinder was bad & leaking through the back seal. I want to replace the power booster and I'm having one hell of a time getting this thing out!! It either hits on the intake or the strut well. Every thing I reference regarding this proceedure gives no indication or warning of such a problem. I know i have followed all the removal instuctions in my repair manual but I still can't seem to contort this thing out of the car. If there is some trick of the trade that anyone could share, I would be very grateful. I have been working on my Honfa for sometime now and realize things are very tight but this is incredible !!
Thanks in Advance
PEACE <><