Honda-Acura.net

Notices
Do It Yourself This is where you will find step by step instructions so you can Do it Yourself!

4th Gen Accord front wheel shake

Thread Tools
 
Old Oct 8, 2004 | 03:44 PM
Share
  #1  
Spyfunkr's Avatar
Spyfunkr
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 265
Likes: 0
From: Maryland
Default 4th Gen Accord front wheel shake
I have a constant shake in my front end, gets worse with braking. I know I have loose tie-rod ends, and Ive ordered them. Could this be a wheel bearing issue? Anyone have DIY pics of tearing apart the wheels?

Thanks, Spy
Reply
0
Old Oct 8, 2004 | 04:15 PM
Share
  #2  
luky1380's Avatar
luky1380
Registered User
 
Joined: Sep 2004
Posts: 55
Likes: 0
Default
first try tie rod and if still gona have vibration when you push the brakes replace front brake rotors and pads and try ballance your tires
Reply
0
Old Oct 8, 2004 | 04:21 PM
Share
  #3  
Spyfunkr's Avatar
Spyfunkr
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 265
Likes: 0
From: Maryland
Default
Ive had 4 sets of wheels/tires on the car, load balanced, etc. The shake is there with or without braking.

Thanks, Spy
Reply
0
Old Oct 8, 2004 | 10:25 PM
Share
  #4  
tjr5150's Avatar
tjr5150
Registered User
 
Joined: Aug 2004
Posts: 47
Likes: 0
Default
put that side of the car on a jack and lift it up if you can shake your wheel then you need to replace your balljoint i had this problem before and replaced tie rods inner and outer i ended up nickle and dimeing myself to death
Reply
0
Old Oct 8, 2004 | 11:02 PM
Share
  #5  
Provocateur's Avatar
Provocateur
On permanent hiatus
 
Joined: Jul 2004
Posts: 9,716
Likes: 0
From: A forum with actual tech
Default
Sorry to cut into this thread but how would you determine your wheel bearing is bad?
Reply
0
Old Oct 9, 2004 | 07:44 AM
Share
  #6  
Spyfunkr's Avatar
Spyfunkr
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 265
Likes: 0
From: Maryland
Default
Good question, in fact, thats part of my question.

Thanks, Spy
Reply
0
Old Oct 9, 2004 | 09:42 AM
Share
  #7  
luky1380's Avatar
luky1380
Registered User
 
Joined: Sep 2004
Posts: 55
Likes: 0
Default
wheel bearing not gona make your front shakeing brake rotors and tie rods/ball joint
Reply
0
Old Oct 9, 2004 | 10:33 PM
Share
  #8  
SmutWanter's Avatar
SmutWanter
"Made to Please"
 
Joined: Nov 2003
Posts: 391
Likes: 0
From: Philly
Default
Rotors could be warped or uneven brake wear (calipers) if the car just shakes when your brake. Since it does it other times too then it could be a cv boot, or a whole axle.
Reply
0
Back to Subforum
Do It Yourself
View Next Unread
clearing headlights in '97 accord




Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -8. The time now is 05:56 PM.