Notices
Do It Yourself This is where you will find step by step instructions so you can Do it Yourself!

'94 Integra sunroof switch

Thread Tools
 
Old Dec 18, 2003 | 12:07 PM
  #1  
rmehler's Avatar
rmehler
Thread Starter
Junior Member
 
Joined: Dec 2003
Posts: 2
Likes: 0
Default '94 Integra sunroof switch

The sunroof opens fine but doesn't always make contact when I try to close it. By hitting and jiggling the swithc for awhile, I can get it to close, so I suspect it's just the contact in the switch.

The question is, how do I get to it? What panels need to be removed and what is the procedure for getting them off?
Reply
Old Dec 18, 2003 | 04:01 PM
  #2  
habitatsk8r392's Avatar
habitatsk8r392
Certified Ricer
 
Joined: Nov 2003
Posts: 211
Likes: 0
From: Athens, Ohio
Default

if its on the left side of the wheel below the vent, then it should just pry out
Reply
Old Dec 20, 2003 | 09:16 AM
  #3  
ExiledinIN's Avatar
ExiledinIN
Senior Member
 
Joined: Nov 2002
Posts: 154
Likes: 0
From: Indiana
Default

http://tech.hybridgarage.com/tech/manuals/

It has the HELMS manual on that site. However, you should get one for yourself. It saves you a lot more than what you pay for...
Reply
Old Dec 20, 2003 | 01:16 PM
  #4  
rmehler's Avatar
rmehler
Thread Starter
Junior Member
 
Joined: Dec 2003
Posts: 2
Likes: 0
Default

Originally posted by habitatsk8r392
if its on the left side of the wheel below the vent, then it should just pry out
Thanks a lot. I was afraid to just use force on it, thinking that I'd bust something, but it just pried out. I've ordered a replacement from an online junkyard and hopefully that will be all it needs.
Reply




All times are GMT -8. The time now is 03:41 PM.