Just wondering if anyone has a link to a page where it has the axle spline counts for all versions of the 2g crx. This would include the tranny side and the knuckle side. Tia

 

don't know of a link, but all the 2g CRX's have the same splines at the transmission and all but the HF's have the same at the hub - the HF is smaller diameter - all are the same length - all 4g civics are the same as the CRX with the STD being the same as the CRX HF

 

:dunno:Looked for a good 20 minutes on google, and this is all I could find. Suprisingly enough, it's from right here on HAN.

https://www.honda-acura.net/forums/s...threadid=64603

 

that's what i thought...i just bought some rebuilt axles for my crx (26 spline) from what i remembered as it was but they look exactly like my hf's axles (which i will return them instead)...unfortunately i don't have time to go out and take off a wheel on my rex to find out for sure

i thought the si axle was a little bit thicker too but maybe i'm wrong

 

HF = Same inner splines as all of them, 23 outer splines.
DX/Si = Same inner splines as all of them, 26 outer splines.

 

yah i had to take my axles in when i got the new integra ones i picked up yesterday to make sure i would have the correct spline count for the zc thats coming in a few days.