Notices

88or 89 crx engine problem

Thread Tools
 
Old Jun 2, 2003 | 01:35 PM
  #11  
crxb16er's Avatar
crxb16er
Registered User
 
Joined: Mar 2003
Posts: 1,412
Likes: 0
From: Tucson AZ
Default

Originally posted by awhell
sorry should have mentioned it's an automatic !
then park it in the junkyard j/k buddy nah everything stays the same as earlier mentioned. hope that helps u some, i didnt get into tranny problems so manual or auto doesnt matter YET.
Reply
Old Jun 4, 2003 | 12:12 PM
  #12  
awhell's Avatar
awhell
Junior Member
 
Joined: May 2003
Posts: 8
Likes: 0
From: L.A., CA
Default

ishould have also mentioned that it vibrates only when at a stop light and in gear!
Reply
Old Jun 4, 2003 | 01:43 PM
  #13  
crxb16er's Avatar
crxb16er
Registered User
 
Joined: Mar 2003
Posts: 1,412
Likes: 0
From: Tucson AZ
Default

motor mount broken,
cylinder compression off due to a blown gasket,
dead cylinder,
cap and rotor worn incorrect or not firing cylinder,
damaged or malfunctioning spark plug or plug wire,
clogged fuel injector.
if its doing it at a stop light with the clutch not engaged could be anything i prevously stated while in gear and while moving, do a visual check of ur motormounts make sure nothings going on with them and u might want to do a compression check and see if somethign is wrong with one of the cylinders, and while ur engine is running pull the spark plug wire out, one at a time, if while u pull out one u dont notice a difference then for whatever reason the cylinder isnt firing, id say try those things and let me know the results, if u want download AIM and i can talk to u directly see if we can get anywhere.
Reply
Old Jun 5, 2003 | 02:25 PM
  #14  
awhell's Avatar
awhell
Junior Member
 
Joined: May 2003
Posts: 8
Likes: 0
From: L.A., CA
Default

hey i already tried the plug wire move and i know it's not a cylinder that's not firing.....but let me get aim then...
Reply




All times are GMT -8. The time now is 02:59 PM.