Hey, i have a 1985 crx its in good running condition but for one problem. the bearing in the axil is stripped and i think i need to replace the axil, for one how much will this cost? Another ? is i was wondering if i can engine swap a b-16a into a yr. 85 crx. plz help me out, this is my first car and i know very little, thanx.
-adam-

 

I think hasport has a kit for putting a b series engine into a 84-87 civic/crx. not sure though

www.hasport.com

 

yea, they do, it costs $650 bucks though.
here is the exact link
http://www.hasport.com/Products/Moun...unt%20AFB1.htm

 

depends on what model 1g crx you have...putting a b16 into requires the conversion over to multiport fuel injection if you don't have the Si model

 

It's Axle not Axil.

 

If you know very little, you should go ahead and purchase a manual (chiltons/helms/etc) for the car you have. Then you'll have that to read up on. Then also buy a manual for whichever engine you decide to toss in. Just an idea. Hope that doesnt' sound like I'm being a thingy head...just trying to help you out!

 

The last axle I had to replace (1986 Accord LXi, passenger side) only cost $50+core for a rebuilt unit. The only problem I had was a frozen suspension fork-LCA bolt which required a new LCA ($115), suspension fork-LCA bolt ($8), and nut for the aforentioned bolt ($3). After I aquired all the parts and a few more tools (32mm impact socket, ball joint puller) I had it together in about an hour.

Just don't forget to replace the cotter pins like "some people":exnbp: