Notices

Changing Radio

Thread Tools
 
Old Feb 19, 2003 | 07:30 AM
  #1  
xBaByGrLx's Avatar
xBaByGrLx
Thread Starter
Senior Member
 
Joined: Jul 2002
Posts: 117
Likes: 0
From: New York
Default Changing Radio

Can anyone tell me how to swap radios in a CRX? Ive never been in one so i dunno.. its for my friend whose about to do it.. thanks
Reply
Old Feb 19, 2003 | 08:58 AM
  #2  
FourthGenHatch's Avatar
FourthGenHatch
I'm RICK JAMES, bitch!
 
Joined: Mar 2002
Posts: 4,742
Likes: 0
From: Baltimore, Md
Default

If by Radio you mean Headunit/CD Player then its easy. You buy the Headunit and installation kit at the store. The kit has wires which you will match up to your Headunit. The wires make it easier since you can just unplug it inside of stripping wires and all that. Then just bolt up the Headunit to the car. It's easy.
Reply
Old Feb 19, 2003 | 09:04 AM
  #3  
xBaByGrLx's Avatar
xBaByGrLx
Thread Starter
Senior Member
 
Joined: Jul 2002
Posts: 117
Likes: 0
From: New York
Default

nah i kinda figured that much.. i think he wants to know how to get it out.. center console and all that good ish.

thanks for ur help
Reply
Old Feb 19, 2003 | 10:25 AM
  #4  
FourthGenHatch's Avatar
FourthGenHatch
I'm RICK JAMES, bitch!
 
Joined: Mar 2002
Posts: 4,742
Likes: 0
From: Baltimore, Md
Default

I don't know how to get a CRX one out cuz I have a Hatch and its different.
Reply
Old Feb 19, 2003 | 10:28 AM
  #5  
xBaByGrLx's Avatar
xBaByGrLx
Thread Starter
Senior Member
 
Joined: Jul 2002
Posts: 117
Likes: 0
From: New York
Default

word thanks anyway.

i like ur hatch btw
Reply
Old Feb 19, 2003 | 11:00 AM
  #6  
Kai's Avatar
Kai
Rotorphile.
 
Joined: Mar 2002
Posts: 10,120
Likes: 0
From: Richmond, VA
Default

Your best bet would be to spend like $10 on a Hayne's or Chilton's manual for the car. They have step-by-step removal instructions, and the rest of the book is pretty handy too... I have one of each. I would post the instructions for the CRX, but my books are back at home.
Reply
Old Feb 19, 2003 | 06:24 PM
  #7  
WhiteRice's Avatar
WhiteRice
Senior Member
 
Joined: Jun 2002
Posts: 967
Likes: 0
From: Denver, CO
Default

It should just push out from the back......Pretty simple.
Reply
Old Feb 23, 2003 | 07:27 PM
  #8  
cwhiteboy's Avatar
cwhiteboy
Senior Member
 
Joined: Mar 2002
Posts: 185
Likes: 0
From: Atlanta, GA
Default

Yeah.. once you take the front panel off it should just push out... if not there may be some clips. Either the biotch clips that require you to push em in with a screw driver or bent metal clips that hold it in, just unbend em and your set... And I do recomend a install kit since the origonal colors for the wires will not match up to the new wires on the headunit... But I can find that out for you if you need to know as well...
Reply




All times are GMT -8. The time now is 06:30 PM.