Fuel Pressure?
Nov 20, 2006 | 05:54 AM
Thread Starter
Joined: Feb 2003
Posts: 1,068
Likes: 0
From: Washington
Fuel Pressure?
What is the Stock fuel pressure suposed to be for a B16A?
I have intake and exhaust. What should mine be set at?
Nov 20, 2006 | 06:09 AM
Joined: May 2000
Posts: 4,261
Likes: 0
From: KCK
I don't recall a specific number but it normally is around 30-35psi for a fuel injected car.
Nov 20, 2006 | 11:38 AM
Thread Starter
Joined: Feb 2003
Posts: 1,068
Likes: 0
From: Washington
30-35 at idle or WOT?
As is, it is set at 30 at idle, and goes to 40 at WOT.
Is that good for a stock B16 with exhaust and intake?
Nov 20, 2006 | 12:41 PM
Joined: May 2000
Posts: 4,261
Likes: 0
From: KCK
30-35 is at idle...40psi at WOT is fine for an n/a engine
if you have forced induction you want up to 60-70psi for WOT to prevent leaning out
Nov 21, 2006 | 11:46 AM
Thread Starter
Joined: Feb 2003
Posts: 1,068
Likes: 0
From: Washington
Ok, im good then.
Just wanted to make sure.
Thanks
Nov 23, 2006 | 02:57 PM
Joined: Mar 2002
Posts: 10,120
Likes: 0
From: Richmond, VA
Just looked up the spec for the B17A1- B16A is identical.
With the vacuum line removed from the regulator and plugged, a gauge between the fuel pump and regulator should read 48-56psi.
Spec for the B18A is 41-48psi. Odd that they are different.
Nov 28, 2006 | 04:17 PM
Thread Starter
Joined: Feb 2003
Posts: 1,068
Likes: 0
From: Washington