Notices

Fuel filter

Thread Tools
 
Old Aug 23, 2006 | 12:14 PM
  #1  
88'CRX's Avatar
88'CRX
Thread Starter
Junior Member
 
Joined: Jun 2006
Posts: 157
Likes: 0
Default Fuel filter

after i change my fuel filter do i need to tourqe any of the bolts down when i install the new one?
Reply
Old Aug 23, 2006 | 01:50 PM
  #2  
ChrisS's Avatar
ChrisS
Senior Member
 
Joined: Dec 2004
Posts: 355
Likes: 0
From: San Jose, CA
Default

On the fuel filter:
-two banjo bolts
-one pressure relief bolt
All need to be torqued to 132 inch-pounds (11 foot-pounds)
Use new copper crush washers. (2 for each banjo bolt, one for the pressure relief bolt)
Reply
Old Aug 26, 2006 | 09:21 PM
  #3  
Kris1212's Avatar
Kris1212
Senior Member
 
Joined: Aug 2004
Posts: 282
Likes: 0
From: CA
Default

im guessing you're talking about an 88 CRX. the banjo bolts should be 16 ft-lbs, not 11
Reply




All times are GMT -8. The time now is 11:21 PM.