tech question about injectors
12-19-2005, 04:45 PM
#1
bad mo fo
Thread Starter
Join Date: Nov 2005
Location: california/nevada
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
tech question about injectors
searched the forums , read some books however i'm still confused.
what is the difference between
high impedance
low impedance - needs a resistor box?
saturated
peak and hold
:thinking: :loco:
what is the difference between
high impedance
low impedance - needs a resistor box?
saturated
peak and hold
:thinking: :loco:
12-20-2005, 07:59 AM
#2
Rotorphile.
Join Date: Mar 2002
Location: Richmond, VA
Posts: 10,120
Likes: 0
Received 0 Likes
on
0 Posts
Peak and Hold = Low impedance 1.7-3.0 ohms
Saturated = High impedance 10-16 ohms
The addition of a resistor box allows low impedance injectors to run on a standard injector output signal. Similarly, high impedance injectors can be run in low impedance cars by removing the resistor box.
Saturated = High impedance 10-16 ohms
The addition of a resistor box allows low impedance injectors to run on a standard injector output signal. Similarly, high impedance injectors can be run in low impedance cars by removing the resistor box.