Could use some help on a clutch update. I am going to upgrade my clutch on my 88 CRX si with a D15B to a stage 1 90-91 clutch. I am also upgrading the to a lightweight Flywheel. Is there anything else I will need other than the Clutch Kit and lightweight Flywheel?

Thank

88REXer

 

Throw out and pilot bearing.

 

technically a clutch kit should come with the throwout and pilot bearings and a clutch alignment tool

a lot of times when I do a clutch i also replace the flywheel and clutch bolts if they look heat stressed or stripped (make sure you torque them to spec too)

 

Thanks guys.

I checked and the kit I bought and it comes with everything:

Pressure Plate
Disc
Throw Out Bearing
Pilot bearing
Alignment Tool
8lbs Chromoly Racing Flywheel

I'll have the guy who is doing it for me check the bolts too.

 

90-91 clutch disc will not fit your 88 transmission - 88 has 21 spline input shaft - 89-91 have 20 spline input shaft

 

i overlooked that info and just responded to the reply...but that is true

 

keep in mind that light flywheels make your takeoffs a bit harder, they are a little tough your clutch.

 

err...ON your clutch