Anyone know if their downpipe on a stock 88-91 CRX si or Dx has a slight angle under the oil pan. I bought a race cat and the thing is straight.After I bolt it up it wants to get real close to the shift linkage. If I keep it at a 15 degree bend from the down pipe its ok. Now I have to find out if the midpipe has the same angle so that I can get it to go straight. This is on my 91CRX HF. I changed manifolds so I could get the straight cat. Im tring to get all bolt ups on the exhaust. Does anyone know if I can get a midpipe that will bolt up to this race cat without custom bending?

 

yes it does they were the cat on header design. I changed mine out with a civic from the same year with the inline cat, no real problems just had to shorten the intermeditate pipe.