Notices

Weird noise when I brake or pass thru rough road

Old Feb 22, 2005 | 05:49 PM
  #1  
oc9crx's Avatar
oc9crx
Thread Starter
Member
 
Joined: Jan 2005
Posts: 53
Likes: 0
From: Los Angeles area
Default Weird noise when I brake or pass thru rough road

I have an 88 crx si and when I brake or my front tires hit a rough road I can hear a noise and it sounds like some part of my suspention is loose, but when I checked the other day I couldnt find the problem. What could it be?
Reply
Old Feb 22, 2005 | 10:51 PM
  #2  
crxkid's Avatar
crxkid
Registered User
 
Joined: Nov 2004
Posts: 141
Likes: 0
Default

i had that problem... thought it was bushings or tie rods or whatever forever... couldn't figure it out... just did a zc swap and when i was removing/changing the axles, the right one (the side the noise was coming from) was broken. so you could give that a shot, or any of the other things i first listed. good luck.

-cody
Reply
Old Feb 28, 2005 | 12:53 AM
  #3  
91_CiViC_RiDeR's Avatar
91_CiViC_RiDeR
Passing_U_N_A_CIVIC
 
Joined: Jul 2004
Posts: 202
Likes: 0
From: Memphis, TN
Default

I would defiantely check the axles...

Chris C.
Reply
Old Feb 28, 2005 | 12:59 PM
  #4  
CroCivic90DX's Avatar
CroCivic90DX
Registered User
 
Joined: Jan 2005
Posts: 67
Likes: 0
From: Croatia, Europe
Default

I had a similar symptom. My wheels also seemed "weak" when going over rough terrain (rail crossing...). The faulty thing in my case was a bushing in this part i don't know the name for in english. It is a "U" shaped metal thing that goes around your spring and holds the rod that goes down to your brake rotors. Well the bushing on that "U" shaped thing.
Reply
Old Mar 8, 2005 | 01:34 PM
  #5  
m735is's Avatar
m735is
Senior Member
 
Joined: Oct 2003
Posts: 875
Likes: 0
From: Buffalo, NY
Default

Upper control bushing. (The "u " shaped thing).

I thought mine was loose calipers, lower control arm bushings,tie rods (inner and outer), shock mounts, axle, wheel bearing or ball joints. I replaced the front shocks and noticed the new upper control arms I installed a few months ago were loose. I tightened the bolts on the two mounts and noise is gone.

By the way, my calipers have some play and so does my axle on the tranny side (normal).
Reply
Old Mar 23, 2005 | 12:44 PM
  #6  
Hoist's Avatar
Hoist
My name is Mud
 
Joined: Jul 2002
Posts: 90
Likes: 0
From: yes
Default

Did you check your muffler bearings, those went out on me last week and i had the same problem
Reply
Old Mar 24, 2005 | 06:54 PM
  #7  
oc9crx's Avatar
oc9crx
Thread Starter
Member
 
Joined: Jan 2005
Posts: 53
Likes: 0
From: Los Angeles area
Default

What are the muffler bearings?
Reply



All times are GMT -8. The time now is 12:26 AM.