si tranyn on zc motor

Reply Subscribe

Thread Tools

Jan 13, 2005 | 05:46 PM

kevo2k6

Thread Starter

Registered User

Joined: Apr 2004

Posts: 27

Likes: 0

si tranyn on zc motor

will the tranny of my 87 crx si bolt up to a zc motor? are all si tranny's the same?

Jan 13, 2005 | 06:03 PM

jlicrx

Senior Member

Joined: Sep 2002

Posts: 548

Likes: 0

From: Colorado Springs

no, transmission will not bolt to ZC - 85 Si transmissions have different gearing than 86-87 - 88-91 Si transmissions are completely different from 85-87 - 92 & up Si is also different from the earlier ones

Jan 13, 2005 | 06:22 PM

kevo2k6

Thread Starter

Registered User

Joined: Apr 2004

Posts: 27

Likes: 0

y does the gearing matter? shouldnt it just be the bolt pattern? and then a flywheel and clutch?

Jan 13, 2005 | 06:26 PM

bluetwo

Relevance is irrelevant

Joined: Jun 2004

Posts: 6,079

Likes: 0

From: Honolulu, HI

Tranny's are way more complicated than that from my understanding. Of course that's not to say that I understand transmissions. I'll prolly never fully understand em.

Jan 13, 2005 | 06:42 PM

Mackenzie C

Senior Member

Joined: May 2004

Posts: 390

Likes: 0

i dont know bout the pre 88 models but the 88-91 trannys are all interchangable. and for the clutch you need to check out the flywheel on the zc or something, i dont know.

Jan 14, 2005 | 01:33 AM

Kai

Rotorphile.

Joined: Mar 2002

Posts: 10,120

Likes: 0

From: Richmond, VA

Quote:

Originally Posted by kevo2k6

will the tranny of my 87 crx si bolt up to a zc motor?

No.

Quote:

Originally Posted by kevo2k6

are all si tranny's the same?

No.

Jan 14, 2005 | 11:50 AM

kevo2k6

Thread Starter

Registered User

Joined: Apr 2004

Posts: 27

Likes: 0

so a 88-91 si tranny WILL work tho?

Jan 14, 2005 | 11:51 AM

kevo2k6

Thread Starter

Registered User

Joined: Apr 2004

Posts: 27

Likes: 0

o and im gettin the zc motor and ecu. will i need a new wiring harness as well?

Jan 14, 2005 | 02:38 PM

Kai

Rotorphile.

Joined: Mar 2002

Posts: 10,120

Likes: 0

From: Richmond, VA

Quote:

Originally Posted by kevo2k6

so a 88-91 si tranny WILL work tho?

It will work on the engine, but it won't work in your car.

Quote:

Originally Posted by kevo2k6

o and im gettin the zc motor and ecu.

I hope you mean an 84-87 browntop ZC. Typical 88-91 blacktop ZC's are not bolt-in swaps.

Jan 14, 2005 | 09:16 PM

#10

kevo2k6

Thread Starter

Registered User

Joined: Apr 2004

Posts: 27

Likes: 0

wat trannys will bolt up and work with the zc motor? regardless of wat car it is going into.

Reply Share

First
Prev
1 / 2
Next
Last

Forum Jump