Thanks for all the input you guys.. Problem solved.. It was the clutch switch. I pressed them in and the car started like a champ... Would both of them cylinders have to be replaced?

 

If the main relay was bad it wouldn't run if push started.

 

damn clutch switches. is the switch like hard to push or seem like it is suffering from old age.... the auto down switch on my power windows was getting stuck and the window would continously try to roll down cause the switch was stuck. it turned out that all it needed was some lubrication. remember that these switches are a few years old depending on the year model, and the lube that was put on at the factory only lasts so long. years of use and dust is the enemy... peace.

 

Hey guys,
Well all that was wrong with the car was that the pin was angleing and going through the hole in the clutch... I talked to v8guy and he said that there is supposed to be a little rubber stopper there. i guess mine fell out... I just put a bolt on it and it worked fine... THanks for the help guys.