racing module
i just got a new comp/racing module from zero gravity racing and have yet to install it. there are 2 wires on either side 2 black and 2 red.it ses to splice into the iat signal wire "the black one" and the power wire "the red one" then reconect them with the same wires coming from the opposite side.however thee are 3 diff jacks going into my ecu 3 on the same side wich one is wich? i dont want to go cutting the wrong wire.
it resets you ecu operating temp it is saposed to pulse the fuel and make it richer, and something to do with spark timing to give you an 15-20 hp in low end perfomance. or so it ses.
Originally posted by A_PHOBIA
it resets you ecu operating temp it is saposed to pulse the fuel and make it richer, and something to do with spark timing to give you an 15-20 hp in low end perfomance. or so it ses.
it resets you ecu operating temp it is saposed to pulse the fuel and make it richer, and something to do with spark timing to give you an 15-20 hp in low end perfomance. or so it ses.
you should have came to HAN and did a search for ebay chips and intake air temp. resistors, it might have persuaded you to not waste your 20 dollars. good luck though.


