Notices

Remote program info

Thread Tools
 
Old Mar 2, 2003 | 02:14 PM
  #1  
useddealer's Avatar
useddealer
Thread Starter
Junior Member
 
Joined: Mar 2003
Posts: 3
Likes: 0
From: Paducah, ky
Default Remote program info

I have a 97 2.5TL and a 99 TL. I need program info please. The 97 has lock and unlock (1 button) the 99 has lock unlock trunk and panic (4 button). Thanks Jim
Reply
Old Mar 2, 2003 | 02:31 PM
  #2  
98CoupeV6's Avatar
98CoupeV6
lots and lots of fail
 
Joined: Dec 1999
Posts: 23,004
Likes: 1
From: Deeeeeeeeeeeeeeetroit
Default

program info? Oh, how to program it. With your car, you should have gotten a little brochure from Honda explaining how. If not, I'm sure someone else can help you
Reply
Old Mar 2, 2003 | 03:22 PM
  #3  
useddealer's Avatar
useddealer
Thread Starter
Junior Member
 
Joined: Mar 2003
Posts: 3
Likes: 0
From: Paducah, ky
Default

These are used cars that I'll be selling at a dealer auction. They didn't come with remotes or instructions. I purchased used remotes. My Acura dealer (Nashville) will not give me the info because I bought used. I guess I'll be getting parts and service at a different dealer. Thanks Jim
Reply
Old Mar 2, 2003 | 03:31 PM
  #4  
98CoupeV6's Avatar
98CoupeV6
lots and lots of fail
 
Joined: Dec 1999
Posts: 23,004
Likes: 1
From: Deeeeeeeeeeeeeeetroit
Default

That's BS. If you can hold on until tommorrow, I can check the info out in my glovebox and get back to you
Reply
Old Mar 2, 2003 | 05:28 PM
  #5  
98CoupeV6's Avatar
98CoupeV6
lots and lots of fail
 
Joined: Dec 1999
Posts: 23,004
Likes: 1
From: Deeeeeeeeeeeeeeetroit
Default

Here're the instructions:

1) Unlock Doors
2) Turn ignition key to "ON" position (II)
3) Press the "LOCK" or "UNLOCK" button on the remote
4) Turn the ignition key to the "OFF" position (0, I)
5) Turn the ignition key to the "ON" position
6) lock or unlock
7) off position
8) on position
9) lock or unlock
10) off position
11) on position
12)lock or unlock - doors should cycle to indicate successful programming. If you only have one remote, turn ignition to off or don't touch anything. if you have 2+ remotes, go to 13:
13) lock on each transmitter that you need to program

*Steps 2-12 must be performed within 5 seconds of each other. Step 13 can be performed within 10 seconds of step 12. If it doesn't work, give me a yell

Chris
Reply
Old Mar 2, 2003 | 08:21 PM
  #6  
useddealer's Avatar
useddealer
Thread Starter
Junior Member
 
Joined: Mar 2003
Posts: 3
Likes: 0
From: Paducah, ky
Default

Thanks I'll try it Tuesday when I'm at the shop. Nashville said it had to be hooked to their computer. A $65.00 fee. They told me how to do it 3 or 4 years ago but I couldn't remember. We bought 8 cars in Feb. with factory remotes and 5 didn't have them. I think I see an eBay trend. I'm sure I've bought my own headlights back, I guess I can start adding remotes to that list. Thanks Jim
Reply




All times are GMT -8. The time now is 02:17 PM.