Notices

crankshaft position sensor problem help!!!

Thread Tools
 
Old Jun 10, 2008 | 07:43 PM
  #1  
tonyng101's Avatar
tonyng101
Thread Starter
Junior Member
 
Joined: Jun 2008
Posts: 5
Likes: 0
From: NC
Default crankshaft position sensor problem help!!!

I have 96 acura TL, I just change out the spark plugs then 2 days later then
engine is stalling and can't rev over 3000 rpm the engine light is on, so i
took it to autozone to pull up the code. then it pull up 6 codes one of them
is po335 (crankshaft position sensor) so do i have to change out the sensor?
but its $350 for the sensor!!
Reply
Old Jun 10, 2008 | 11:23 PM
  #2  
AcuraTL's Avatar
AcuraTL
Lord Vader Moderator
 
Joined: May 1999
Posts: 1,466
Likes: 0
From: Bay Area, CA
Default

What are the other 5 codes for?
__________________
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.

Reply
Old Jun 11, 2008 | 07:28 PM
  #3  
tonyng101's Avatar
tonyng101
Thread Starter
Junior Member
 
Joined: Jun 2008
Posts: 5
Likes: 0
From: NC
Default

po336, po135, po141, po700, p1786, p1787. its 6 codes
Reply
Old Jun 12, 2008 | 12:27 AM
  #4  
AcuraTL's Avatar
AcuraTL
Lord Vader Moderator
 
Joined: May 1999
Posts: 1,466
Likes: 0
From: Bay Area, CA
Default

But do you know what they read? You mentioned one is for crankshaft position sensor, what about the other 5?
__________________
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.

Reply
Old Jun 15, 2008 | 07:22 AM
  #5  
tonyng101's Avatar
tonyng101
Thread Starter
Junior Member
 
Joined: Jun 2008
Posts: 5
Likes: 0
From: NC
Default

i think im gonna replace the sensor do u know where the sensor is?
Reply
Old Jun 15, 2008 | 07:23 AM
  #6  
tonyng101's Avatar
tonyng101
Thread Starter
Junior Member
 
Joined: Jun 2008
Posts: 5
Likes: 0
From: NC
Default crankshaft position sensor replacement help!!

Im having problems with my 96 TL, I have to replace the crankshaft position sensor. does anyone know where is it? and how to replace it?
Reply
Old Jun 15, 2008 | 11:53 AM
  #7  
AcuraTL's Avatar
AcuraTL
Lord Vader Moderator
 
Joined: May 1999
Posts: 1,466
Likes: 0
From: Bay Area, CA
Default

Before changing the sensor, you need to find out what the other 5 codes are for. 99% of the time, it is NOT the crankshaft position sensor and is something else. You can change it if you want, afterall, it is your money.
__________________
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.

Reply
Old Jun 16, 2008 | 11:21 AM
  #8  
tonyng101's Avatar
tonyng101
Thread Starter
Junior Member
 
Joined: Jun 2008
Posts: 5
Likes: 0
From: NC
Default

2 of the codes are the o2 sensor, 2 are transmission, 2 are tranaxel so i took it to the auto repair shop they told me the sensor cause all other problems.
Reply




All times are GMT -8. The time now is 09:34 AM.