Radio Code???
Thread Starter
Junior Member
Joined: Feb 2006
Posts: 1
Likes: 0
Radio Code???
I have a 1999 Acura 2.3cl and i was changing the fuse for my lights and i pulled out the radio fuse by accident and now my stock radio won't work...When i turn it on it says i need a code. Does anyone know where to get the code from??
Thanks,
Matt
Thanks,
Matt
Lord Vader Moderator
Joined: May 1999
Posts: 1,466
Likes: 0
From: Bay Area, CA
Do a search first, because this topic had been discussed many times. Look inside your owners manual/glove box to see if you have a card with the security code on it. If not, you will need to pull out the factory deck and get the serial number to your dealer in order to get the code.
__________________
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.
Member
Joined: Jan 2006
Posts: 37
Likes: 0
w0rd. Each radio code is different for each car. That is across the board, accord, civic, CL, etc.
TL has it right. If there is nothing written down as the radio code inside your owners or matience manual, you will have to go to the dealer with your serial number.
Worst case, they will just reprogram and set a code for you. They might charge you an hour of labor for that.
TL has it right. If there is nothing written down as the radio code inside your owners or matience manual, you will have to go to the dealer with your serial number.
Worst case, they will just reprogram and set a code for you. They might charge you an hour of labor for that.