Notices

Code 65, i need help

Thread Tools
 
Old Aug 23, 2005 | 12:29 PM
  #1  
CL2.2vtec's Avatar
CL2.2vtec
Thread Starter
Registered User
 
Joined: Aug 2005
Posts: 2
Likes: 0
Default Code 65, i need help

Hey everyone my grandmas 97 2.2cl just threw a code 65, it's the Secondary Oxygen Sensor Heater Circuit. I was wondering what do I have to do to fix this problem. Is it the o2 sensor? Please help me out, i have to smog it soon. Thanks for the help.
Reply
Old Aug 25, 2005 | 07:49 PM
  #2  
CL2.2vtec's Avatar
CL2.2vtec
Thread Starter
Registered User
 
Joined: Aug 2005
Posts: 2
Likes: 0
Default

anyone???
Reply
Old Aug 26, 2005 | 06:19 AM
  #3  
98CoupeV6's Avatar
98CoupeV6
lots and lots of fail
 
Joined: Dec 1999
Posts: 23,004
Likes: 1
From: Deeeeeeeeeeeeeeetroit
Default



Reply
Old Aug 26, 2005 | 06:20 AM
  #4  
98CoupeV6's Avatar
98CoupeV6
lots and lots of fail
 
Joined: Dec 1999
Posts: 23,004
Likes: 1
From: Deeeeeeeeeeeeeeetroit
Default

Oh yeah and the ECM lists for $715. Pray it's an O2S.
Reply
Old Sep 15, 2005 | 02:43 PM
  #5  
mrherrera's Avatar
mrherrera
Junior Member
 
Joined: Sep 2005
Posts: 23
Likes: 1
Default

i have a 96 2.5 TL,i replace the rear brakes and the ABS light came on,how do i get the ABS code?anyone have the codes?how can i reset the ABS light?
Reply
Old Sep 15, 2005 | 02:59 PM
  #6  
98CoupeV6's Avatar
98CoupeV6
lots and lots of fail
 
Joined: Dec 1999
Posts: 23,004
Likes: 1
From: Deeeeeeeeeeeeeeetroit
Default

Originally Posted by mrherrera
i have a 96 2.5 TL,i replace the rear brakes and the ABS light came on,how do i get the ABS code?anyone have the codes?how can i reset the ABS light?
Buy a Helms or PM me.
Reply
Old Sep 23, 2005 | 04:45 AM
  #7  
TexasHonda's Avatar
TexasHonda
Registered User
 
Joined: Aug 2004
Posts: 19
Likes: 0
Default

ABS system resets at each startup. If light remains on, the ABS fault is permanent indicating a need for repairs. Wheel sensors are a common fault and frequently just cleaning the sensors and wheel spokes that rotate beneath the sensors can restore sensor operation. A shop manual is essential to diagnose and repair faults.

good luck
Reply
Old Sep 27, 2005 | 10:14 PM
  #8  
hondatech's Avatar
hondatech
Honda tech/eprom hackr
 
Joined: Oct 2002
Posts: 1,156
Likes: 0
From: Sacramento, CA.
Default

Just check the wires for the heater portion of the O2 for continuity. It won't have continuity and will need to be replaced. Very common and I see them all the time.
Reply




All times are GMT -8. The time now is 09:41 PM.