hello,

ive had my vigor for roughly 6 months. when the ignition wires went bad and then got them fixed the ABS light came on. they fixed my ignition wires with a killer switch. the abs light would come on but after id turn of the car and switch the killer switch to off. and come back into the car and switch it back to on it wouldnt come back on. one day i broke the killer switch but it stayed on the on position like a normal car would work. and normally it would turn on and then like 3 days later come back off. now its been on for about a month what could be wrong with it. did it stay stuck or how can i clear it or know if something is wrong.

 

I don't get how they fixed your iginition wires with a killer switch?

 

I am so lost.

 

yea i dunno how they did it but they did. see the first owner of the acura had it fixed when they soldered the wires together and once we got the steering wheel panels out to reach the ignition the peices of solder came out so what the mechanic did was that the positive wire was connected to the switch and the other one i dont know where it lead to prolly to the fuse box and then he grouned the lil connection. so when the switch was in the down position nothing would turn on.it would just turn on and kick the key back to the number 2 position. then when the switch was moved to the up position and the key was turned to the position before the start all the instument panel would light up just like in any regular normal car and turn on naturally. but the ABS light got stuck. and now that the switch broke. the abs light has been on for about a month. and i dont know what it clould be.