Question: Amp For Subs
X-Moder8er
Joined: Feb 2000
Posts: 1,013
Likes: 0
From: Sesame Street
I'm using a JBL BP1200 to power 2 12W6's in my wife's car. It's a little overkill for W6's, but since its her car and she rarely cranks it up, it's all good...
A JBL BP600 should work very well with any 2 W6's because of the voice coil configuration. Wire eack sub to 3 ohms and parallel them both down to 1.5 ohms. 300 watts a piece should be fine...
A JBL BP600 should work very well with any 2 W6's because of the voice coil configuration. Wire eack sub to 3 ohms and parallel them both down to 1.5 ohms. 300 watts a piece should be fine...
Thread
Thread Starter
Forum
Replies
Last Post
k3ifers
Audio, Security, & Automotive Lighting
6
Oct 17, 2002 02:24 AM