Notices
Audio, Security, & Automotive Lighting Troubleshoot wiring problems and get equipment suggestions all in one place. Now expanded to include Automotive Lighting

Wiring JDM Mirrors to fold together, how?

Old Jul 8, 2003 | 01:43 PM
  #1  
plkalra's Avatar
plkalra
Thread Starter
Senior Member
 
Joined: Jul 2002
Posts: 172
Likes: 0
From: Los Angeles
Default Wiring JDM Mirrors to fold together, how?

I am getting some JDM power folding mirrors installed this coming friday from a
shop out in Walnut, CA. My question is I want my mirrors to fold in/out with the
button (as they will since that is the difference between ther USDM and JDM) but
also to fold in when I turn my car off and fold back out when I turn my car back on
(both of them together).
I'm not sure if the shop can do this that's why I need to see if someone may be able
to shed some light on this. If I tap the signal from the ignition wire (the one coming to
the back of the stereo), and then tap into the main relay for the mirrors, would that
work? DO i need to add a relay between the ignition and the main relay?

I have an aftermarket moonroof on my accord and how that works is when I turn the
car off it automatically closes. But obviously when I turn my car on it doesn't open
itself. So because of that I'm not sure if the ignition wire would work.
Reply
Old Jul 8, 2003 | 01:47 PM
  #2  
jfiedler's Avatar
jfiedler
Junior Member w/Fries
 
Joined: May 2003
Posts: 630
Likes: 0
From: mass
Default

do the mirrors open with one touch or do you have to hold the button down till they are fully opened/closed?
Reply
Old Jul 8, 2003 | 03:58 PM
  #3  
plkalra's Avatar
plkalra
Thread Starter
Senior Member
 
Joined: Jul 2002
Posts: 172
Likes: 0
From: Los Angeles
Default

with one touch they go in
Reply
Old Jul 8, 2003 | 04:13 PM
  #4  
jfiedler's Avatar
jfiedler
Junior Member w/Fries
 
Joined: May 2003
Posts: 630
Likes: 0
From: mass
Default

get a relay that when supplied with power will latch for a second or so, then shut off. trigger this with your ignition wire.

use the sunroof trigger wire to activate the mirror retract action, as there is obviously something monitoring the off status of your ignition and shutting your sunroof in response.

make sure you use a diode to prevent your sunroof close button from closing your mirrors along with it.
Reply
Old Jul 15, 2003 | 04:10 PM
  #5  
hueman's Avatar
hueman
Junior Member
 
Joined: Jun 2003
Posts: 19
Likes: 0
Default

^^^What if it's raining? i'm thinkin it's a bad idea to have the sunroof retract when you turn on the car...

just had to say that
Reply
Old Aug 11, 2003 | 07:03 PM
  #6  
streetlvlhatch's Avatar
streetlvlhatch
Junior Member
 
Joined: Aug 2003
Posts: 5
Likes: 0
Default

what civic are your mirrors from? where did u get yours
Reply
Old Aug 11, 2003 | 07:42 PM
  #7  
strychnine's Avatar
strychnine
i am legend
 
Joined: Jul 2003
Posts: 3,104
Likes: 0
From: northwest NC
Default

I know it's not exactly the same but at one time i saw a post on the12volt.com on how to have your mirrors fold in when you arm your alarm and vice-versa.
Reply
Old Aug 14, 2003 | 04:51 PM
  #8  
19.3secS2K's Avatar
19.3secS2K
my bum is on the swedish!
 
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
Default

here's a link to that post on the12volt.com:

http://www.the12volt.com/installbay/...=286&KW=mirror
Reply
Old Aug 14, 2003 | 04:54 PM
  #9  
19.3secS2K's Avatar
19.3secS2K
my bum is on the swedish!
 
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
Default

here's a similar topic: http://www.the12volt.com/installbay/...4527&KW=mirror
Reply
Old Aug 16, 2003 | 07:40 AM
  #10  
cooliojones's Avatar
cooliojones
Senior Member
 
Joined: Aug 2002
Posts: 203
Likes: 0
From: Atlanta, Georgia
Default

First of all where did you get those mirrors from? The sound tight!
Reply


All times are GMT -8. The time now is 04:04 AM.