redid the S2000 install
#1
Member
Thread Starter
Join Date: Mar 2002
Location: Colorado Springs, Colorado
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
redid the S2000 install
well the car was going to a show on the 29th so i redid the system around a little bit.
there was not very good light when i took this picture but tomorrow ill get some better ones and add to this thread
there was not very good light when i took this picture but tomorrow ill get some better ones and add to this thread
#6
That red carpet would look so much sweeter if it were painted fiberglass. Nice work though. What is the cover for next to the cap?
If I could make a suggestion on the cap, display it behind plexiglass or flush the surface of it in the installation without exposing the terminals to anything that can contact it. Depending if it were a sanctioned autosound competition they could deduct points in at least 2 catagories for that. Just a suggestion.
If I could make a suggestion on the cap, display it behind plexiglass or flush the surface of it in the installation without exposing the terminals to anything that can contact it. Depending if it were a sanctioned autosound competition they could deduct points in at least 2 catagories for that. Just a suggestion.
#7
Member
Thread Starter
Join Date: Mar 2002
Location: Colorado Springs, Colorado
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by arch iceman
That red carpet would look so much sweeter if it were painted fiberglass. Nice work though. What is the cover for next to the cap?
If I could make a suggestion on the cap, display it behind plexiglass or flush the surface of it in the installation without exposing the terminals to anything that can contact it. Depending if it were a sanctioned autosound competition they could deduct points in at least 2 catagories for that. Just a suggestion.
That red carpet would look so much sweeter if it were painted fiberglass. Nice work though. What is the cover for next to the cap?
If I could make a suggestion on the cap, display it behind plexiglass or flush the surface of it in the installation without exposing the terminals to anything that can contact it. Depending if it were a sanctioned autosound competition they could deduct points in at least 2 catagories for that. Just a suggestion.
the cover is just where the spare tire is supposed to go but because he has 18" rims and lowered there is no way to jack it with a flat and even if he changed it there is no room for the flat tire when he takes it off. so i just made a storage compartment out of that space. the cover is remobavle to put stuff in there. also it allows a hole for the bass to come through.
also i know what your saying about the exposed terminals on the cap. i doubt he will ever show it in a full blown stereo show. he is more into showing the car at import shows and the like. i would have done plexiglass but he wanted to have the cap in a place it could be shown off a little more.
Thread
Thread Starter
Forum
Replies
Last Post
Nelson
Other Honda & Acura News
0
05-24-2012 11:00 AM
Nelson
Other Honda & Acura News
0
01-11-2012 07:10 AM
spanky
The Basement
32
11-08-2007 07:19 PM
mystikalxxtasy
Parts Classifieds
3
06-16-2006 10:48 AM