2 boxed 10s + amp + stock HU
01-08-2003, 01:14 PM
#1
poop
Thread Starter
Join Date: Dec 2002
Location: bay city , tx
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
2 boxed 10s + amp + stock HU
i think ive decided i want mo bang for tha buck, tho the infinity basslink sounds like a good deal for its size n all that, i just want bigger bang 
anybody with experience w/ connecting a box and amp to a stock headunit have any suggestions?
lookin for a lightweight box and nothin tooooo expensive
doesnt necessarily have to be easy to wire either
thx in advance
anybody with experience w/ connecting a box and amp to a stock headunit have any suggestions?
lookin for a lightweight box and nothin tooooo expensive
doesnt necessarily have to be easy to wire either
thx in advance
01-09-2003, 07:02 AM
#2
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
a lightweight box means a smaller box.
my old setup use to weigh about 70 lbs. 2 12inch W3s in a sealed .75" MDF box. about 1.25cf per sub. IT WAS HEAVY!
if you want something ligthweight, i would go for a 10inch that requires little air space in a sealed box. the only one i can think of is a IDQ.
there is really no problem with using the stock HU and connecting an amp. of course there are drawbacks, but most people cant tell the difference.
my old setup use to weigh about 70 lbs. 2 12inch W3s in a sealed .75" MDF box. about 1.25cf per sub. IT WAS HEAVY!
if you want something ligthweight, i would go for a 10inch that requires little air space in a sealed box. the only one i can think of is a IDQ.
there is really no problem with using the stock HU and connecting an amp. of course there are drawbacks, but most people cant tell the difference.
__________________
.
.