98 accord. front speaker installation
im going to take out the stock and put in apline type r 6 1/2 on the two front doors. i know the window may interfere. how do i avoid the speakers not to collide with the window. I also would like to know where i can buy (online) the plastic case or plate the goes on the door before i put the speaker. size 6 1/2 ofcourse
|
I just made MDF Spacer rings to space my speakers out a bit. I think eBay even sells pre-made MDF spacers.
|
Originally Posted by k2dragon
(Post 3683577)
im going to take out the stock and put in apline type r 6 1/2 on the two front doors. i know the window may interfere. how do i avoid the speakers not to collide with the window. I also would like to know where i can buy (online) the plastic case or plate the goes on the door before i put the speaker. size 6 1/2 ofcourse
this years models wont interfere tey are shallow enough. or should be...they fit in my 91 teg |
You should check the mounting depth of the front doors. I THINK http://crutchfield.com might have that information.
Like what totalimmortal said...you can make your own MDF spacers if needed. |
i know alpines will not fit in my 99 accord they are almost half an inch too deep try the polk db series they fit
|
Originally Posted by mr22na
(Post 3684214)
what year type R's are they?
this years models wont interfere tey are shallow enough. or should be...they fit in my 91 teg |
All times are GMT -8. The time now is 10:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands