Notices
Audio, Security, & Automotive Lighting Troubleshoot wiring problems and get equipment suggestions all in one place. Now expanded to include Automotive Lighting

Amp for Rockford Punch 1 Sub

Thread Tools
 
Old Jun 27, 2006 | 02:19 PM
  #1  
burnrubber's Avatar
burnrubber
Thread Starter
Nucking Futs
 
Joined: Nov 2005
Posts: 726
Likes: 0
From: Alabama
Default Amp for Rockford Punch 1 Sub

I need an amp that would be the best match for my Rockford Punch 1 sub (150RMS, 300Max). I need an amp that will make this thing thump hard in my car, also it is in a ported box. I know that matching RMS to RMS is the best, but most amps are over rated and the RMS and Max are not the real RMS and Max because they were tested on a 14.4V system.

Thanks in advance
Reply
Old Jun 29, 2006 | 08:15 PM
  #2  
dmacaalay's Avatar
dmacaalay
Monkey See, Monkey Do!
 
Joined: Jun 2006
Posts: 114
Likes: 0
From: N. Las Vegas, NV
Default

if you wanted to stay with rockford fosgate, you can try the RF P3001.. its a mono 300 watt amp, good match for your sub... if you dont want to stick with fosgate, you can try alpine.. there are way too many amps to just recommend one.. but hope this helps a little..
Reply
Old Jun 30, 2006 | 12:13 AM
  #3  
scotttharobot's Avatar
scotttharobot
beer here
 
Joined: Jun 2006
Posts: 3,278
Likes: 0
Default

there is a plethora of amps that will suit you. What is your budget?
Reply
Old Jun 30, 2006 | 07:54 AM
  #4  
burnrubber's Avatar
burnrubber
Thread Starter
Nucking Futs
 
Joined: Nov 2005
Posts: 726
Likes: 0
From: Alabama
Default

well, i think i am going to get a kenwood KAC-7202 amp and get a second sub
Reply
Old Jun 30, 2006 | 08:50 AM
  #5  
dleccord's Avatar
dleccord
Member
 
Joined: Mar 2006
Posts: 395
Likes: 0
Default

what is you budget?
Reply




All times are GMT -8. The time now is 12:23 PM.