need wire identification, ple-e-ese
Thread Starter
Registered User
Joined: Nov 2005
Posts: 1
Likes: 0
From: Santa Monica, CA
need wire identification, ple-e-ese
Hi
I need to identify/locate in the dashboard (or nearby) the following wires to install Pioneer AVIC N1 in my Acura Integra 1992: speed signal (most important!), reversegear signal input (reversing lamp I guess – is any chance I could find the wire in dashboard?), parking brake (in dashboard). Many thanks, Sergey.
I need to identify/locate in the dashboard (or nearby) the following wires to install Pioneer AVIC N1 in my Acura Integra 1992: speed signal (most important!), reversegear signal input (reversing lamp I guess – is any chance I could find the wire in dashboard?), parking brake (in dashboard). Many thanks, Sergey.
Registered User
Joined: Aug 2005
Posts: 96
Likes: 0
From: outside shoveling snow
Unsure if this is 100% correct. I am unsure if this is even what you are looking for. Use it at your own risk...
Wire ----- Color ----- Polarity ----- Location
Speed Sense PURPLE (AC) ECU MODULE TO THE RIGHT OF GLOVE BOX PIN 14 OF A 26 PIN PLUG
Reverse Lights RED (+) ECU PIN13
Neutral Safety GREEN/WHITE (-) AT GEAR SELECTOR SWITCH
(PSC/ECU TO THE FAR RIGHT BEHIND GLOVE BOX)
Wire ----- Color ----- Polarity ----- Location
Speed Sense PURPLE (AC) ECU MODULE TO THE RIGHT OF GLOVE BOX PIN 14 OF A 26 PIN PLUG
Reverse Lights RED (+) ECU PIN13
Neutral Safety GREEN/WHITE (-) AT GEAR SELECTOR SWITCH
(PSC/ECU TO THE FAR RIGHT BEHIND GLOVE BOX)
