Problem with RF 500s AMP
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 125
Likes: 0
From: Vancouver, WA
Problem with RF 500s AMP
well my car was broken into and I just installed the replacement cd player that was stolen and now I can't get my amp (rockford fosgate 500s) thats hooked up to my sub-woofer to work. I actually don't know specifically if the amp is not working but the LED on it is not lighting up and the sub and cd player are definitely working so I can only assume that the amp is the problem. Do amps have fuses that can be blown or other things that could likely be causing this? And the amp is definitely recieving power so that is not the problem.
Senior Member
Joined: Jul 2002
Posts: 1,065
Likes: 0
From: Raleigh, NC
Originally Posted by honura
But he said that the Amp is working fine.
How do you know the amp has power? Take a digital multimeter and test the voltage getting to the amp through the power wire, and test the remote wire to make sure that is hooked up correctly. Also make sure you have a solid ground, no paint or anything inbetween the metal.
Seni
Joined: Aug 2003
Posts: 3,401
Likes: 0
From: N.Y. Queens
Originally Posted by carrwash13
I actually don't know specifically if the amp is not working but the LED on it is not lighting up and the sub and cd player are definitely working so I can only assume that the amp is the problem.
Senior Member
Joined: Jul 2002
Posts: 1,065
Likes: 0
From: Raleigh, NC
Originally Posted by honura
Originally Posted by honura
But he said that the Amp is working fine.
Originally Posted by carrwash13
I actually don't know specifically if the amp is not working