Notices
Audio, Security, & Automotive Lighting Troubleshoot wiring problems and get equipment suggestions all in one place. Now expanded to include Automotive Lighting

Power cable wiring for 03 civic

Thread Tools
 
Old 07-20-2004, 06:21 PM
  #1  
AnTbizzo
Registered User
Thread Starter
 
AnTbizzo's Avatar
 
Join Date: Jul 2004
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default Power cable wiring for 03 civic

anyone know a good place to run 2 awg power cables to the trunk. Is there a hole somewhere in the firewall. If not where is a good place to drill
Old 07-21-2004, 10:29 AM
  #2  
profuse007
Registered User
 
profuse007's Avatar
 
Join Date: Jan 2004
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

always look for a factory grommet b4 drilling. especially drill on a civic will do more damage than good.

theres a grommet under the passenser side carpet. try that first!!!

man, 2 american wire guage huh? what are you running that needs so much currents to be pass by?
Old 07-21-2004, 02:28 PM
  #3  
AnTbizzo
Registered User
Thread Starter
 
AnTbizzo's Avatar
 
Join Date: Jul 2004
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

jl audio 450/4 powering 2 set of jl audio xr 650csi
jl audio 1000/1 powering 12w7 maybe 2 set
Old 07-21-2004, 02:36 PM
  #4  
profuse007
Registered User
 
profuse007's Avatar
 
Join Date: Jan 2004
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

shiiit ballin!!!! you have some security on that?
Old 07-21-2004, 02:53 PM
  #5  
AnTbizzo
Registered User
Thread Starter
 
AnTbizzo's Avatar
 
Join Date: Jul 2004
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

i just went to go check out the car the only grommet i see is near the center console is it that one that you are talking about? I dont think it can fit w/ all the other wires that are in there. Workign on security later.
Old 07-21-2004, 09:35 PM
  #6  
AnTbizzo
Registered User
Thread Starter
 
AnTbizzo's Avatar
 
Join Date: Jul 2004
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

ok finally decided to drill a hole on the driver side. There is a spot under the break master which has no wires. you gonna need a really long drilling bid. it drops right into the inside of your car right next to the kick panel so it is easy to run the cable
Old 07-22-2004, 04:03 AM
  #7  
profuse007
Registered User
 
profuse007's Avatar
 
Join Date: Jan 2004
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

just be very careful, there aint no room on the other side that you cant hit!!!




All times are GMT -8. The time now is 04:38 PM.