amp/subs problem...
#11
the amp he has doesnt do 2OHM bridged.
RMS Power measured at 12.5 Volts DC:
37.5 Watts x 2 into a 4 Ohm load with less than 0.05% Thd+N
75 Watts x 2 into a 2 Ohm load with less than 0.1% Thd+N
150 Watts bridged into a 4 Ohm load with less than 0.1% Thd+N
and its too small to be powering 2 of those subs. thats the reason i believe for it to be getting so hot.
RMS Power measured at 12.5 Volts DC:
37.5 Watts x 2 into a 4 Ohm load with less than 0.05% Thd+N
75 Watts x 2 into a 2 Ohm load with less than 0.1% Thd+N
150 Watts bridged into a 4 Ohm load with less than 0.1% Thd+N
and its too small to be powering 2 of those subs. thats the reason i believe for it to be getting so hot.
__________________
.
.
#12
I didn't make the box myself, bought it at some "stereo corner store."
I also called several places, here is what they told me:
1.) pushing the amp too much and the subs can't take it, which is why they are distorting
2.) bad box
3.) bad subs
4.) bad wiring
???????????????????? -----ugghhhhh... i love having my system in my car but when problems come up i hate it.
I also called several places, here is what they told me:
1.) pushing the amp too much and the subs can't take it, which is why they are distorting
2.) bad box
3.) bad subs
4.) bad wiring
???????????????????? -----ugghhhhh... i love having my system in my car but when problems come up i hate it.
Thread
Thread Starter
Forum
Replies
Last Post
k3ifers
Audio, Security, & Automotive Lighting
6
10-17-2002 02:24 AM