View Poll Results: nice job?
yay?
7
50.00%
nay!
7
50.00%
Voters: 14. You may not vote on this poll
what's the verdict on this box?
#11
It's my first day.
Thread Starter
Join Date: Nov 2001
Location: Grafton, WI.
Posts: 13,635
Likes: 0
Received 0 Likes
on
0 Posts
it sounds excellent. i only have 200wattsX10" because i just wnated finished sound. i didnt want the bolts coming off this car, and i wanted to be able to remove it for racing.
now the front and sides are plywood, and the back was fiberglass i layed in on a layer of masking tape, (3 actually), after the back hardened, (i used mesh), i fiberglasses that to the front of the box, with fiberglass over the face of the wood. I ran another layer of weave around the entire thing, and then used bondo to make it fit the top and sidewalls as close as possible. (laying fiberglass vertically is pretty tough).
after taht i wrapped it in material and after some search was able to obtain all the passthrough cable support i needed with a little work and ingenuity
now the front and sides are plywood, and the back was fiberglass i layed in on a layer of masking tape, (3 actually), after the back hardened, (i used mesh), i fiberglasses that to the front of the box, with fiberglass over the face of the wood. I ran another layer of weave around the entire thing, and then used bondo to make it fit the top and sidewalls as close as possible. (laying fiberglass vertically is pretty tough).
after taht i wrapped it in material and after some search was able to obtain all the passthrough cable support i needed with a little work and ingenuity
#13
It's my first day.
Thread Starter
Join Date: Nov 2001
Location: Grafton, WI.
Posts: 13,635
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by see_fu
redo the carpet and this time work fronm the front to the back. you don't want to see any seams
redo the carpet and this time work fronm the front to the back. you don't want to see any seams
and when i close my hatch it wrinkles the carpet..which is gay.
Last edited by Fujiwara Takumi; 07-23-2002 at 09:47 AM.
#15
It's my first day.
Thread Starter
Join Date: Nov 2001
Location: Grafton, WI.
Posts: 13,635
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 99CivicHB
do you have any pics with the box taken off? I like it :thumbup: Nice work
do you have any pics with the box taken off? I like it :thumbup: Nice work
#16
my friend will be making one of those for my fifth gen hatch soon once my interior is back in. His look seemless. Almost like they are supposed to be there. He is really good at that ish. Makes tons of custom enclosures.
maybe he will sell some for the hatches after he does mine.:thumbup:
maybe he will sell some for the hatches after he does mine.:thumbup:
#17
It's my first day.
Thread Starter
Join Date: Nov 2001
Location: Grafton, WI.
Posts: 13,635
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by white lightnin
my friend will be making one of those for my fifth gen hatch soon once my interior is back in. His look seemless. Almost like they are supposed to be there. He is really good at that ish. Makes tons of custom enclosures.
maybe he will sell some for the hatches after he does mine.:thumbup:
my friend will be making one of those for my fifth gen hatch soon once my interior is back in. His look seemless. Almost like they are supposed to be there. He is really good at that ish. Makes tons of custom enclosures.
maybe he will sell some for the hatches after he does mine.:thumbup:
#19
It's my first day.
Thread Starter
Join Date: Nov 2001
Location: Grafton, WI.
Posts: 13,635
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by white lightnin
Wont be able to take it out to race if you have your strut bar through the middle of it.
Wont be able to take it out to race if you have your strut bar through the middle of it.
oh... i will, i just have to figure out how. I think i may end up building a u shaped pattern into it or something of that sort. Dunno yet.