7th gen accord exhaust
Not much is available for the new 7th Gen. Accords. If your looking into getting an aftermarket exhaust system then you may want to checkout DC Sports & Apexi since they both have an aftermarket exhaust system available for the inline 4 i-VTEC 03' Accords.
As for lowering springs you have several choices available from Eibach and H&R. I'm not sure if Neuspeed has a set of lowering springs for the inline 4 03' Accords. Only coilover available is by Ground-Control however Ground-Control is not a true coilover setup. It's just a sleeve coilover that requires aftermarket shocks/struts.
There are no aftermarket shocks/struts available. Both AEM & Injen have cold air intakes.
Comptech is supposedly working on several products for the 03' Accords but mainly for the V6 Accords. Greddy is also working on an aftermarket full cat-back exhaust system and is probably for the V6 Accords again. You may have to go w/ a custom exhaust system for your inline 4.
As for lowering springs you have several choices available from Eibach and H&R. I'm not sure if Neuspeed has a set of lowering springs for the inline 4 03' Accords. Only coilover available is by Ground-Control however Ground-Control is not a true coilover setup. It's just a sleeve coilover that requires aftermarket shocks/struts.
There are no aftermarket shocks/struts available. Both AEM & Injen have cold air intakes.
Comptech is supposedly working on several products for the 03' Accords but mainly for the V6 Accords. Greddy is also working on an aftermarket full cat-back exhaust system and is probably for the V6 Accords again. You may have to go w/ a custom exhaust system for your inline 4.
Thread Starter
Registered User
Joined: Sep 2003
Posts: 32
Likes: 0
From: southern california, laguna niguel
is there any custom way of setting up coil overs? like form a 02 accord maybe or something? and with exhaust could i get an exhaust for an 02 and get the piping custom done?
You should not use any coilovers or lowerings springs not made for the car you have. Coilovers or lowerings springs from the previous generation Accords will not fit properly on the 03' Accords.
IMO your better off just getting an entire custom made exhaust system instead of using an exhaust can and custom piping from an 02' Accord.
IMO your better off just getting an entire custom made exhaust system instead of using an exhaust can and custom piping from an 02' Accord.


