Updated pics of my car...
Thread Starter
Registered User
Joined: Jun 2003
Posts: 49
Likes: 0
Updated pics of my car...
I did the best with it I could. The camera didn't like to focus correctly, its a little old. I'm looking for suggestions and feedback I guess.
http://www.cardomain.com/id/dinzdale
Oh and here is the rundown on the products I used.
Clay Bar (clay magic)
dawn wash
Einszett Ultra Car polish
Swirl Mark Remover
Klasse AIOx2
Klasse SGx4
S100 paste wax(recent)
....all by hand
These pics are taken after a month of this process. So it has been washed at least 4 times and quick detailed no telling how many times.
http://www.cardomain.com/id/dinzdale
Oh and here is the rundown on the products I used.
Clay Bar (clay magic)
dawn wash
Einszett Ultra Car polish
Swirl Mark Remover
Klasse AIOx2
Klasse SGx4
S100 paste wax(recent)
....all by hand
These pics are taken after a month of this process. So it has been washed at least 4 times and quick detailed no telling how many times.
Thread Starter
Registered User
Joined: Jun 2003
Posts: 49
Likes: 0
"You dawn washed, then Clayed, right?"
Well kind of, I clayed after a wash, it was a week later when I got the rest of my products and decided to start the rest of the process. It was during the summer and the car didn't get used much, so a week of waiting was nothing.
You are right though, that is the correct way to do it. I wish I had waited and clayed afterwards, but i ran out of clay. It was pretty dirty cause i did my windows.
Well kind of, I clayed after a wash, it was a week later when I got the rest of my products and decided to start the rest of the process. It was during the summer and the car didn't get used much, so a week of waiting was nothing.
You are right though, that is the correct way to do it. I wish I had waited and clayed afterwards, but i ran out of clay. It was pretty dirty cause i did my windows.
I eat plastic.
Joined: Dec 2002
Posts: 15,177
Likes: 0
From: Detroit, MI
You waited a week and then used the clay bar? :nono: And agreed with cutting the bar, but thirds is a little too much. When clay bars were a little bigger a few years ago, sure, but now they're getting pretty small.
Any issues with the Klasse SG and hazing? It loves to do that. I need to try Zaino, I don't like Klasse or Blackfire a whole lot.
Any issues with the Klasse SG and hazing? It loves to do that. I need to try Zaino, I don't like Klasse or Blackfire a whole lot.
Thread Starter
Registered User
Joined: Jun 2003
Posts: 49
Likes: 0
"You waited a week and then used the clay bar? "
Nope, I washed, clayed, waxed. Then a week later when the rest of my stuff came from Autopia, I dawn washed and started the rest of the process. The first wax was Mothers Reflections.
To take off SG, I used two microfiber towels. One was damp and the other was dry. I used the damp towel first, then buffed with the dry one. I did this one panel at a time though. I got this method from JimWH on autopia. here is a link to his exact Klasse instructions.
http://www.autopia.org/forums/showth...threadid=12590
You may have to join autopia to view it, but for this thread alone, it is definitely worth it.
Nope, I washed, clayed, waxed. Then a week later when the rest of my stuff came from Autopia, I dawn washed and started the rest of the process. The first wax was Mothers Reflections.
To take off SG, I used two microfiber towels. One was damp and the other was dry. I used the damp towel first, then buffed with the dry one. I did this one panel at a time though. I got this method from JimWH on autopia. here is a link to his exact Klasse instructions.
http://www.autopia.org/forums/showth...threadid=12590
You may have to join autopia to view it, but for this thread alone, it is definitely worth it.