Notices

Finally Did It...

Thread Tools
 
Old Sep 23, 2003 | 10:11 PM
  #11  
VRGNCD5's Avatar
VRGNCD5
cause it's tight!
 
Joined: Jun 2002
Posts: 8,044
Likes: 0
From: 916
Default

looks nice bro.

and good choice on the Nokya Arctic whites, I had em in my car too at the time of my accident. Very sweet bulbs:thumbup:

I think those black housing bumper lenses would look sweet on my car w/always on mod done to make the bulbs stay lit like the corners on my 94:yes:

How much did they run you?
Reply
Old Sep 23, 2003 | 10:33 PM
  #12  
jsinger's Avatar
jsinger
Thread Starter
IH8S810
 
Joined: Feb 2003
Posts: 424
Likes: 0
From: Wichita, KS
Default

Originally posted by VRGNCD5
looks nice bro.

and good choice on the Nokya Arctic whites, I had em in my car too at the time of my accident. Very sweet bulbs:thumbup:

I think those black housing bumper lenses would look sweet on my car w/always on mod done to make the bulbs stay lit like the corners on my 94:yes:

How much did they run you?
ty man!

yeah I've thought about that mod, will they still blink?

I got the black housing bumper lights on eBay for $17.50 shipped. Here's some for the 94-95's
Reply
Old Sep 23, 2003 | 10:53 PM
  #13  
VRGNCD5's Avatar
VRGNCD5
cause it's tight!
 
Joined: Jun 2002
Posts: 8,044
Likes: 0
From: 916
Default

Originally posted by jsinger
ty man!

yeah I've thought about that mod, will they still blink?

I got the black housing bumper lights on eBay for $17.50 shipped. Here's some for the 94-95's
damn man, sounds like you got a deal. Those would run me about $23 shipped, not bad.

Oh, now that I think about it. You didn't toss out ur old bumper did you? Please say no

I am in need of the little clip thingy that the screw that holds the bumper lens in place goes into. Somehow I lost mine when replacing my bumper. I have duct tape holding one bumper lens on right nowh:
Reply
Old Sep 23, 2003 | 11:03 PM
  #14  
jsinger's Avatar
jsinger
Thread Starter
IH8S810
 
Joined: Feb 2003
Posts: 424
Likes: 0
From: Wichita, KS
Default

Originally posted by VRGNCD5
damn man, sounds like you got a deal. Those would run me about $23 shipped, not bad.

Oh, now that I think about it. You didn't toss out ur old bumper did you? Please say no

I am in need of the little clip thingy that the screw that holds the bumper lens in place goes into. Somehow I lost mine when replacing my bumper. I have duct tape holding one bumper lens on right nowh:
Yeah I looked until like page 12 for a cheaper auction, I'm sure you could find one.

And yes I still have my old bumper, but I too am in need of both those clips... they are 4 dollars a piece at from Honda. I didn't have them on my old bumper either. I had one light that had a nut on the other side of the screw and the other was a wood screw bigger than the plastic hole that kept it in pretty good. If I had em, I'd send em too you free of charge... actually if you want.. when I go to get me some... (either from Honda or salvage yard) I'll pick up an extra set for you if you want... just let me know.
Reply
Old Sep 23, 2003 | 11:13 PM
  #15  
VRGNCD5's Avatar
VRGNCD5
cause it's tight!
 
Joined: Jun 2002
Posts: 8,044
Likes: 0
From: 916
Default

Originally posted by jsinger
Yeah I looked until like page 12 for a cheaper auction, I'm sure you could find one.

And yes I still have my old bumper, but I too am in need of both those clips... they are 4 dollars a piece at from Honda. I didn't have them on my old bumper either. I had one light that had a nut on the other side of the screw and the other was a wood screw bigger than the plastic hole that kept it in pretty good. If I had em, I'd send em too you free of charge... actually if you want.. when I go to get me some... (either from Honda or salvage yard) I'll pick up an extra set for you if you want... just let me know.
Yeah, I'll see what I can find on ebay, im in no rush really so hopefully I'll luck out and get em for under $20.

Yeah bro, if you can pick up a set for me that'd be sweet! Let me know what the damage is and I'll send you the $$$.

A couple weeks ago, I went out to the track w/accordhybrid and lil_1_2002 and accordhybrid told me I should take out my passenger side bumper lens to get that air flow directly on the filter of my CAI, I was too embarrassed to say "I can't, it's held on w/duct tape" h:
Reply
Old Sep 23, 2003 | 11:36 PM
  #16  
jsinger's Avatar
jsinger
Thread Starter
IH8S810
 
Joined: Feb 2003
Posts: 424
Likes: 0
From: Wichita, KS
Default

Originally posted by VRGNCD5
Yeah, I'll see what I can find on ebay, im in no rush really so hopefully I'll luck out and get em for under $20.

Yeah bro, if you can pick up a set for me that'd be sweet! Let me know what the damage is and I'll send you the $$$.

A couple weeks ago, I went out to the track w/accordhybrid and lil_1_2002 and accordhybrid told me I should take out my passenger side bumper lens to get that air flow directly on the filter of my CAI, I was too embarrassed to say "I can't, it's held on w/duct tape" h:
LOL, yeah ... i actually thought about leaving it out too when I saw that it's like a direct flow to the filter.

I need to fly out to cali sometime and kick it with some accord ppl. I can fly for free, so I'd take advantage of that but i wouldn't be able to bring my car oh wellz... I'll have to plan something with someone sometime... like pick me up at the airport or somethin'.
Reply
Old Sep 23, 2003 | 11:40 PM
  #17  
uclaccord's Avatar
uclaccord
Senior Member
 
Joined: Jun 2003
Posts: 831
Likes: 0
Default

oooo...thought u meant the clear bumpers were rice and ur blackhousings unriced it...if i remember that rice sticker...then its a very good thing u got rid of it
Reply
Old Sep 23, 2003 | 11:48 PM
  #18  
VRGNCD5's Avatar
VRGNCD5
cause it's tight!
 
Joined: Jun 2002
Posts: 8,044
Likes: 0
From: 916
Default

Originally posted by jsinger


LOL, yeah ... i actually thought about leaving it out too when I saw that it's like a direct flow to the filter.

I need to fly out to cali sometime and kick it with some accord ppl. I can fly for free, so I'd take advantage of that but i wouldn't be able to bring my car oh wellz... I'll have to plan something with someone sometime... like pick me up at the airport or somethin'.
I didn't have a screwdriver long enough to get it out even if I wanted to so I just let that be the reason.

Yeah man, let me know when ur ready to fly out here. If you fly into Sacramento, im like 20 min from the airport.

We had a meet a couple months ago, it was sweet. Alot of Accords showed up, me and about 10 cars caravaned down to the site of the meet, it was so cool. We're trying to throw one last meet together before the weather gets bad, keep an eye on the thread in this forum and see if you can make it.
Reply
Old Sep 24, 2003 | 12:05 AM
  #19  
jsinger's Avatar
jsinger
Thread Starter
IH8S810
 
Joined: Feb 2003
Posts: 424
Likes: 0
From: Wichita, KS
Default

Originally posted by VRGNCD5
I didn't have a screwdriver long enough to get it out even if I wanted to so I just let that be the reason.

Yeah man, let me know when ur ready to fly out here. If you fly into Sacramento, im like 20 min from the airport.

We had a meet a couple months ago, it was sweet. Alot of Accords showed up, me and about 10 cars caravaned down to the site of the meet, it was so cool. We're trying to throw one last meet together before the weather gets bad, keep an eye on the thread in this forum and see if you can make it.
Yeah I had trouble with my screw driver not being long enough too. I had to make the holes just a little bigger on my old bumper.

I just checked the website of the airline that I'd fly. It goes to Sacramento, so I'll be watchin' that thread about the meet and I'll let you know.
Reply
Old Sep 24, 2003 | 12:29 AM
  #20  
jsinger's Avatar
jsinger
Thread Starter
IH8S810
 
Joined: Feb 2003
Posts: 424
Likes: 0
From: Wichita, KS
Default

Originally posted by uclaccord
oooo...thought u meant the clear bumpers were rice and ur blackhousings unriced it...if i remember that rice sticker...then its a very good thing u got rid of it
Yeah it is!

Old bumper


New bumper
Reply



All times are GMT -8. The time now is 10:02 PM.