Remove 95 Accord starter
07-05-2012, 03:42 PM
#1
Junior Member
Thread Starter
Join Date: May 2008
Location: Chicago, IL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Remove 95 Accord starter
Hi, I followed this answer:
http://www.justanswer.com/honda/2by3...-2-2-vtec.html
I have the same problem as the above. And I took the picture :
http://vincentchiu.com/temp/temp1.jpg
The gap between metal housing(transaxle) and the 14 mm bolt is too narrow to mount socket.
So any expert who has replaced 94-97 Accord starter before. How did you remove the bolt behind? There seems to be no way to remove by using standard 3/8" - 14 mm either 6 points or 12 points socket?
Please help...
VC
http://www.justanswer.com/honda/2by3...-2-2-vtec.html
I have the same problem as the above. And I took the picture :
http://vincentchiu.com/temp/temp1.jpg
The gap between metal housing(transaxle) and the 14 mm bolt is too narrow to mount socket.
So any expert who has replaced 94-97 Accord starter before. How did you remove the bolt behind? There seems to be no way to remove by using standard 3/8" - 14 mm either 6 points or 12 points socket?
Please help...
VC
07-09-2012, 07:32 AM
#2
Junior Member
Thread Starter
Join Date: May 2008
Location: Chicago, IL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hi, I followed this answer:
http://www.justanswer.com/honda/2by3...-2-2-vtec.html
I have the same problem as the above. And I took the picture :
http://vincentchiu.com/temp/temp1.jpg
The gap between metal housing(transaxle) and the 14 mm bolt is too narrow to mount socket.
So any expert who has replaced 94-97 Accord starter before. How did you remove the bolt behind? There seems to be no way to remove by using standard 3/8" - 14 mm either 6 points or 12 points socket?
Please help...
VC
http://www.justanswer.com/honda/2by3...-2-2-vtec.html
I have the same problem as the above. And I took the picture :
http://vincentchiu.com/temp/temp1.jpg
The gap between metal housing(transaxle) and the 14 mm bolt is too narrow to mount socket.
So any expert who has replaced 94-97 Accord starter before. How did you remove the bolt behind? There seems to be no way to remove by using standard 3/8" - 14 mm either 6 points or 12 points socket?
Please help...
VC
Solved - see my post on other forum - http://www.hondaaccordforum.com/foru...starter-48631/
VC