Hi,

I have a greddy header for a 95 accord sohc vtec, on the instructions that came with it, it says to connect the oxygen senser to the downpipe.... now on my oem exhaust manifold i have a hole where you can screw in the sensor, but on the greddy header There is no hole... Do I have the right header ?? Or do I have to do some cutting? Someone please help me. I should have though about this before I took apart my oem headers:doh:

 

sorry to tell you but you have the wrong header. im assuming that you dont have an EX do you? b/c thats what that header is designed for. if you had an EX there would be a small piece of piping directly after the header about 5 inches long that holds the O2 sensor. you could probably take it to a shop though and have it drilled so you wouldnt have to send it back.

 

No,
I DO have an EX, Sohc vtec. Also the small peice of piping, are you saying its connected to the header or somewhere else?? and on my shipping box its says for a 95 accord ex... so it seems right
thanks for the reply

 

Ok,

I talked to a greddy tech and he said that they should come with the part welded (to insert the O2 sensor) on... I talked to the place that sold me the part they said that it doesnt, (the guy i talked to said his friend had a 96 accord same engine as mine and it didnt come with the welded part for O2 sensor) so anyway I am going to just move the O2 sensor down right after the downpipe and put it on a aftermarket catalytic converter