Put in new TYC Gen 2 Projectors in Accord coupe 2K, need to align the light, help!
Registered User
Joined: Dec 2003
Posts: 76
Likes: 0
From: Ashland, OR
Originally Posted by kaliraver69
I need to know how to align my right projector it is shooting the light kinda high and just wanted to know how I can aim it down or align both of them.
Joined: Jul 2003
Posts: 252
Likes: 0
From: CDN
Originally Posted by Wuzkrackin83
there should be two screws that you could turn
i will post pics tomarrow. i have the same lights and had the condensation problem but it wasnt that bad.
the only thing i dont like about those lights is that my bulbs would go out. the only ones that lasted were the silver stars that i had in them.
i wanna put an hid kit in mine. any suggestions ?
i will post pics tomarrow. i have the same lights and had the condensation problem but it wasnt that bad.
the only thing i dont like about those lights is that my bulbs would go out. the only ones that lasted were the silver stars that i had in them.
i wanna put an hid kit in mine. any suggestions ?
My Accord Drives Smooth.
Joined: Oct 2003
Posts: 109
Likes: 0
From: Georgia
Well I got some projectors off ebay, they had condinsation in the drivers side, but it went away and didnt come back, also on the back there is a black tube that lets in and out air sealing them want help air still gets in.
To adjust them there are like 3 screws for the projector, should be brass looking and there are 2 screws for the high beams (brass also) screw them in and out until the beam is straight.
Also for me I need to know why every time I adjust the projector on the drivers side it blows a fuse? When looking at the cut off line it is not straight it is blury, but on the passenger side it is perfectly straight and blueish purple. I am thinking about taking the projector out and going in and doing som surgery to fix the problem. I was just unscrewing the cap on the back of the projector and all of a sudden it blows a fuse, thats crazy, that ticks me off!
Pics of cutoff line below!
To adjust them there are like 3 screws for the projector, should be brass looking and there are 2 screws for the high beams (brass also) screw them in and out until the beam is straight.
Also for me I need to know why every time I adjust the projector on the drivers side it blows a fuse? When looking at the cut off line it is not straight it is blury, but on the passenger side it is perfectly straight and blueish purple. I am thinking about taking the projector out and going in and doing som surgery to fix the problem. I was just unscrewing the cap on the back of the projector and all of a sudden it blows a fuse, thats crazy, that ticks me off!
Pics of cutoff line below!