Notices

i have a question

Thread Tools
 
Old Jun 24, 2003 | 11:43 AM
  #1  
xX94aCcOrDXx's Avatar
xX94aCcOrDXx
Thread Starter
leet member
 
Joined: Nov 2002
Posts: 787
Likes: 0
From: Nor*CAL
Default i have a question

i cleaned my engine bay a while ago. when i turned my engine on to evaporate the water, i noticed the radiator fan didnt turn on. so after everything dried off, i took the car out and drove for 20 mins, and looked in the engine again and the fan still wasnt turning. i never noticed when my fan would turn on or off before. is it normal not to turn on, or did i f*k something up in my engine.

thanks
Reply
Old Jun 24, 2003 | 11:50 AM
  #2  
uclaccord's Avatar
uclaccord
Senior Member
 
Joined: Jun 2003
Posts: 831
Likes: 0
Default

for future ref...cold water and hot engine don't mix...busts up the metal...b/c the metal condenses/shrinks/cools too quick...sry not sure about the fan...maybe fuse or u got some water that splashed somewhere?
Reply
Old Jun 24, 2003 | 12:02 PM
  #3  
vtecinside's Avatar
vtecinside
Cracker Quack!
 
Joined: Nov 1998
Posts: 659
Likes: 0
From: LI, NY
Default

I noticed that too on my 94. The fan goes on almost never. I think if I let the motor idle for an hour it would come on once in that time, whereas my bros 96 LX has a fan that comes on very often....go figure...

as long as it ain't overheating don't stress too much....its just a 94 thing...

noel
Reply




All times are GMT -8. The time now is 03:25 PM.