Chipping a 94 accord EX
Thread Starter
Member
Joined: Jun 2002
Posts: 34
Likes: 0
From: Charlotte, NC
Chipping a 94 accord EX
Does anyone know the correct installation directions for chipping a 94 accord ex? i've heard all you do is swap the chip but i'm not sure...anyone know, or done this?
un-Touch'd krew
Joined: May 2001
Posts: 51,774
Likes: 1
From: My own level of hell
Well "chipping" is kind of a generic term.
Actually they don't just replace a chip anymore but rather connect the ECU to a laptop and reprogram the chip that is in it already.
Actually they don't just replace a chip anymore but rather connect the ECU to a laptop and reprogram the chip that is in it already.
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
cx power!
Joined: Jun 2002
Posts: 2,435
Likes: 0
From: berkeley, ca --> la, ca representin' tha 510&626
Originally posted by Nightshade
Well "chipping" is kind of a generic term.
Actually they don't just replace a chip anymore but rather connect the ECU to a laptop and reprogram the chip that is in it already.
Well "chipping" is kind of a generic term.
Actually they don't just replace a chip anymore but rather connect the ECU to a laptop and reprogram the chip that is in it already.
un-Touch'd krew
Joined: May 2001
Posts: 51,774
Likes: 1
From: My own level of hell
Originally posted by dantastic
u cant externally reporgram stock honda ecus
u cant externally reporgram stock honda ecus
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
Rice Rocket
Joined: Mar 2003
Posts: 185
Likes: 0
From: Miami, FL
Nightshade,
You can externally program OBD-2 Honda ECU's threw the diagnostic connector and also OBD-1 Hondata setups. All other OBD-0 and OBD-1 setups must be chipped.
As for the 1994 EX ECU (P0A) all you have to do is remove the Oki 28 pin eprom and replace it with your programed eprom. The P0A already has the CMOS gate, Resistor, Jumper, and Capcitors installed.
You can externally program OBD-2 Honda ECU's threw the diagnostic connector and also OBD-1 Hondata setups. All other OBD-0 and OBD-1 setups must be chipped.
As for the 1994 EX ECU (P0A) all you have to do is remove the Oki 28 pin eprom and replace it with your programed eprom. The P0A already has the CMOS gate, Resistor, Jumper, and Capcitors installed.
Senior Member
Joined: Jun 2002
Posts: 671
Likes: 0
From: Raleigh, NC
Originally posted by dantastic
u cant externally reporgram stock honda ecus
u cant externally reporgram stock honda ecus
un-Touch'd krew
Joined: May 2001
Posts: 51,774
Likes: 1
From: My own level of hell
Originally posted by BustedLX
Nightshade,
You can externally program OBD-2 Honda ECU's threw the diagnostic connector and also OBD-1 Hondata setups. All other OBD-0 and OBD-1 setups must be chipped.
As for the 1994 EX ECU (P0A) all you have to do is remove the Oki 28 pin eprom and replace it with your programed eprom. The P0A already has the CMOS gate, Resistor, Jumper, and Capcitors installed.
Nightshade,
You can externally program OBD-2 Honda ECU's threw the diagnostic connector and also OBD-1 Hondata setups. All other OBD-0 and OBD-1 setups must be chipped.
As for the 1994 EX ECU (P0A) all you have to do is remove the Oki 28 pin eprom and replace it with your programed eprom. The P0A already has the CMOS gate, Resistor, Jumper, and Capcitors installed.
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
cx power!
Joined: Jun 2002
Posts: 2,435
Likes: 0
From: berkeley, ca --> la, ca representin' tha 510&626
Originally posted by smakdown
Ever heard of hondata? www.hondata.com
Ever heard of hondata? www.hondata.com