hi, i was wondering what u guys would think of this set up for a 94 accord lx in stock red color

So far i got:
Intake (short ram)
Exahust (dtm style)
S-type tails (for sale or trade for all clears)
all clear front
Type-R grill

Future setup...ideas coments welcome
DIY black housings
JDM Black corners (websites with good prices please )
Replace clear bumpers with stock amber ones
CF eyebrows (keep cf w/ black housings or just paint to match)
WW rear lip
Greddy front (looking if u got one for sale please contact me)
Stock sides for now they look ok (friend has WW kit with stock sides looks good)
94-97 Stock 7 spokes (powder coated gunmetal <-- does that sound good?)
Some form of drop (ideas/price cheapest with good ride? or whatever)
All clear tail lights modded to red/white tails
i think thats it? if i fogot please tell me what else

mostly going for looks right now All show!!! no go
go comes later.....$$$$$ is needed also so send donations :naughty: haha jk

any and all suggestions welcome....thanks guys:wiggle:

 

anyone?? coments ideas please hehe

 

I think you should do everything in the Future Set-Up list EXCEPT for the eyebrows. All clears look like ass IMO, but I have never seen home-made red/clears from them. S-Types look ok, but are they not already the All red w/ a little clear kind? Or are they the All clear with two red dot kind? Also, the stock 7 spokes would look nice, but I'm not sure about painted on your color car, silver would prolly look fine... then again who knows. www.autodynamic.com has JDM corners... check it out. I'm still debating whether or not to go with stock amber bumper lights or keep my euro clears w/ my JDM corners and headlights. Here is some help w/ the JDM headlights when you need it.

-I used Duck Tape Brand, blue colored masking tape... it's supposed to be less sticky that other things, I'm pretty sure that 3M makes an equivalent product.
-I used DupliColor "Low Gloss Black" 500 degree paint from AutoZone.
-I baked them in the oven... 350 degrees for 4 Minutes, pry as much as you can, then you might have to put them back in for another 2 Minutes, then pry them apart. Worked great. Oh, and put them on a baking sheet. I did one light at a time, and used a thin flat head screwdriver to pry with.

As for the bumper... FINALLY!!!!!!! HERE is THE REAL way to do it.

1) Take out your lower bumper turn signal lights.
2) Take out one screw on each side in your wheel well, it is located about 3/4 of the way up if you follow the edge near the front of the car. It is a phillips head screw with a washer on it. It looks different than all of the other screws in the wheel well... metal screw, not a plastic pop in one.
3) Take out all the screws along the lower lip of the car. You may not have to take them all out, but I know you have to take the ones on the side of the car out, and better safe than sorry. Only takes 2 minutes to take them all out... (8mm or 10mm bolts)
4) Take out the two bolts that are behind each of the lights, (two bolts on each side... either 10mm or 12mm bolts, goldish colored), this is easiest if you have two 3 inch extensions for your socket wrench.

Good Luck!

 

Oh yeh, get some HID's if you can afford them. If not, do the Silverstar 9005 Conversion.

 

thanks....the red/clear acutally looks really nice i think....my friend has a custom set of them

 

I suggest buying the Depo blackhousing lights b/c your stock ones are 10 years old and will show lots of chips.

Eyebrows are a pick...Up to you.

Greddy lip and WW rear is :thumbup: . You will need bigger sides eventually down the line....Looks funny without em.

A kit with stock wheels looks really bad....You will need to buy 17s atleast soon.

Need to drop the car about 1.5 to 2 inches to minimize the huge wheel gap.


Good luck and have fun.

 

BTW "i like jdm" i like ur accod very clean


you think?? ive seen some on here they do look all that bad...ummm i think has them? im thinking AUX has them with greddy lip and doesnt look to bad...plus there cheaper then other rims haha but yeah a nice set of 17's would like nice...any sugestions?...no center caps...i kinda like the way they look....in general though do u think gunmetal + red car looks good? or no just go silver

 

yah even some 17"s are a must if u get a kit...

ur plans look good to me, nothing ricey

BT what is a Exahuit?? is that spelling error for exhaust? hehe

 

ahhhh hahahahahaha wow didnt see that thanks hahahaha thats kinda funny actually....made that last night really quick hehe :doh:

 

I have all clear tails for sale... one has a small chip in the lower outer corner of the lens... but its kinda hard to notice... $25 plus shipping.