Sticking EGR valve
08-25-2009, 11:22 AM
#1
Registered User
Thread Starter
Join Date: Oct 2005
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Sticking EGR valve
1994 Accord ex 193K. I cleaned the valve 4k ago. I noticed
that the valve is sticking again.
I cleaned out the egr with carb cleaner.
What are the causes a valve to have this particular problem. After only 4K.
Thank
you for your advice.
that the valve is sticking again.
I cleaned out the egr with carb cleaner.
What are the causes a valve to have this particular problem. After only 4K.
Thank
you for your advice.
08-27-2009, 05:55 AM
#3
Registered User
Join Date: May 2005
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
02-10-2010, 05:58 AM
#6
Member
Join Date: May 2008
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Im having the same EGR problems and wanted to know how to clean out the valves and manifold? I replaced the EGR a few months back and Check Engine light came back P0401Innsufficent Flow??? How To take Apart and what to clean it with ?? Thanks gUYS!!!
03-12-2010, 05:13 PM
#7
Member
Join Date: Feb 2008
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Go to the dealer and get the EGR gasket kit ... then look at your manifold, there you will find the the passage the exhaust takes into your intake ... figure out the hardware and take it apart. BE DANG CAREFUL, not to let the carbon chunnks to go into the cylinders (assuming you take the injectors out like most apps) ... I used a scribe and a drill bit (minus the drill) to manually clean out the port holes, and sucked the carbon away with a shop vac.